Single Phase Din-Rail Mounted Kwh Electricity Meter

Description:

ZOSVG-015 single phase din-rail watt-hour meter Application type dem015 single phase din rail watt-hour meter is a kind of new style single phase electronic watt-hour meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and smt techniques, etc. The meter completely accord with relevant technical requirements of class 1 and class 2 single phase energy meter stipulated in national standard GB/t17215-2002 and international standard iec61036. It can accurately and directly measure 50hz or 60hz active energy consumption from single phase AC electricity net. It can display total energy consumption by step type impulse register. It has following features: Good reliability, small volume, light weight, specious nice appearance, convenient installation, etc. Functions and features 1.35mm standard din rail installation, complying with standard din en5002.2.18mm width, complying with standard din43880.3. May select 5+1 digits display (99999.1kwh) and 6+1 digits display (999999.1kwh).4. Impulse output when no power, complying with standard din43864. DESCRIPTION Static watt hour single phase meter VOLTAGE 230V AC 50-60Hz MAXIMUM LOAD CAPACITY 25A ACCURACY ±1% Class 1 OWN POWER CONSUMPTION 0,5VA STARTING CURRENT AT POWER FACTOR 1 25mA TEMPERATURE RANGE -20°C - +50°C - Operating COUNTER Drum-type register with 5 digits and 1 decimal digit in red MISCELLANEOUS S0 - interface for energy management systems to DIN 4386418 VDC to 27 VDC, max. 27mA, impulse length 80msPositive connection to terminal 20Pulse rate R for optical coupler 2000 i/kWhPulse rate R for LED 2000 i/kWh DIMENSIONS 17.5mm wide, 87mm long, 60mm deep MOUNTING Onto support rails corresponding to EN50022 STANDARDS Corresponding to IEC1036 and EN61036 ? marked