High Efficiency Fluidized Bed Drier

Description:

The structure of fluidization bed is of round so as to avoid dead corner. Inside
the hopper there is a stir in order to avoid agglomeration of raw material and forming
canal of flow. The granule is discharged through the method of turning over. In this way it is very convenient and full. The discharging system can be designed as requested too. It is operated at the conditions of negative pressure and seal. The air is filtered. Therefore, it is simple in operation and convenient in clean. It is an ideal equipment that is in conformity with the requirement of GMP. The drying speed is fast and the temperature is uniform. In general, the drying time is 20-30 minutes. When air is purified and heated, it is introduced from the bottom of induced-draft fan and passed through the screen plate of raw material. In working chamber, the state of fluidization is formed through stirring and negative effect. The moisture is evaporated and removed rapidly and the raw material is dried quickly.

Place of Origin:	China
Brand:	SPM