Description: Fiber Optic 8/10-bit Digitally Encoded N Video with N Audio, N Data,N Ethernet Transmission System
Features:
8/10 Bit Digitally Encoded Modulation
NTSC, PAL, SECAM Compatible
SMT and Surface Mount Technology
Industrial grade Design
Lightening-proof Up to 4,000V
Overload and Short Circuit Protection
Anti-Electromagnetic
Signal status intelligent indication
ST, FC Optical Connector
10db Budget with 50/125
13db Budget with 62.5/125
36db Budget with Single-mode Fiber
20KM (SM) & 2KM (MM), Max to 100KM
5 years Warranty
DESCRIPTION:
Transition Networks Analog Video + Data TX and RX units transport analog composite
video and data simultaneously over multimode or single mode fiber. The TX device receives the
video output from the
camera and transmits it over the fiber. In addition, the TX device receives the data stream over fiber and transmits it to the
camera to control PTZ functionality. The RX device receives the
video signal on fiber and converts it back to an analog composite
video stream and outputs the
video on
coaxial cable to the
monitor. In addition, the RX device receives the data stream from the PTZ
controller and transmits it over the fiber to the other end of the link.
All the conversion is performed in real time. Automatic gain control installed on both Transmitter and Receiver maintains desired
quality of videos contrast and brightness for extended distance. No field adjustments are necessary.
Video Performance:
Sampling Resolution : 8Bit/10Bit PCM
Sampling Frequency : 15MHz
Output/Input Signal Levels: 1Vp-p 75 Ohm
Input Overload Level : 1.5Vp-p 75 Ohm
Input Bandwidth: 5Hz- 8MHz
Video In/Output Impedance: 75 Ohm(Unbal)
Differential Gain 1% Type
Differential Phase 1Type
Signal to Noise Ratio(S/N) 70dB (weighted)
Data Performance:
Data Rate RS232 120kbps/300kbps
RS422 120kbps/300kbps
RS485 120kbps/300kbps
Bit Error Rate: < 10^ 9
| Place of Origin: | China(Mainland) |
|---|
| Brand: | CMOLO |
|---|
| Model No. : | C-FX-CWDM |
|---|
| Payment Terms : | TT |