Step Motor Drive(Q2HB88M/613M)

Description:
Q2HB88M(613M) is a constant angle and constant torque stepper drive. The driven voltage range from DC24V-80V (DC40V-130V). It can match 2-phase hybrid stepper motors whose rated current is under 8A (6A), shaft diameter range from 86mm to 110mm. It is widely used in numerical device



such as curving machine, medium-sized numerical control machine, packing machine.



Features

1)  High performance, low price

2)  Two group 32 channels constant angel and constant torque subdivision. Highest subdivision: 480

3)  The motor phase current is reduced to set current value 100 ms after receiving the last pulse edge

4)  Bipolar constant current chopping circuit

5)  Opto-isolated input/output

6)  Driven current is adjustable continuously from 0.5A/phase to 8A/phase (0.4A/phase to 6.4A/phase)

7)  Single power supply, voltage arrange from DC24/V to 80V (DC40V to130V)

8)  Highest response frequency: 200Kpps

9)  Overvoltage protection, overheat protection, overcurrent protection



Caution

1)  Please dont reverse the power supply, supply voltage shouldnt exceed 80V DC (130V).

2)  Input control signal is 5V, current-limiting resistance should be connected when over 5V.

3)  O.H/L.V is low input voltage / overheat indicator. The indicator lights and the drive shuts off if the drive temperature is over 70 or input voltage is below 24V (40V). It doesnt work until the temperature falls to 50. The heat sink is needed when overheat occurs.

Place of Origin:	China(Mainland)
Brand:	Bs
Model No. :	Q2HB88M/613M
Price Terms :	FOB Shenzhen