Polytetrafluoroethylene (PTFE) Membrane

Description:
PTFE series is constructed of imported polytetrafluoroethylene membrane media and non-woven or silk net support.The material of cage,core and end capare polypropylene.Adaptors are welded with cartridges without glue,so there are no problems of release to cause second pollution.Experiencing 100% integrity test before ex-factory.

FEATURE
1)  Un-hydrophilic membrane,100% efficiency of
   steamsterilizing in wet or dry condition.
2)  Better performance of high temperature-resistance,
   repeatable in-line steams sterilizing.
3)  Max strength and washable.
4)  Low initial pressure drop;High flow rate of air;Long
   service life.

SPECIFICATION     10"
1)  Micron Retention Rating:
2)  Liquid:0.22m    0.45m
3)  Air:0.02m,0.05m
4)  Length:5"/10"/20"/30"/40"
5)  Diameter:OD 69mm   ID 28mm
6)  Filtration area:0.6 square-meters
7)  Maximum recommended operating temperature:90 at
   0.15Mpa
8)  Maximum recommended differential pressure:0.42Mpa at
   25
9)  Recommended maximum change out pressure drop:0.2Mpa at
   25
10) Maximum steam temperature:121per half hour

Brand:	Minipore
Payment Terms :	L/C T/T MoneyGram Western Union
Price Terms :	FOB Shanghai