Description: E1/V.35 optional fiber
optical modem FME-2
contact:Daisy
E-mail:daisy[at]veecom.com.cn
MSN:walj83[at]hotmail.com
Yahoo:daisycn.liu[at]yahoo.com.cn
Features:
FME-2 is high-speed fiber optic modem with two E1/V.35 interface optional.
The two interfaces of FME-2 can be V.35 or E1 (G.703), and also one can be V.35,
another is E1 (g.703).
The data transmitting rate is from N*64K (N=1-31) to 2048 Kbps.
The
clock is optional internal, external and slave.
To achieve point to point testing, FME-2 can process the diagnosis of some troubles
though the
switch AL, DL and RL.
There are many indicators LEDs on the panel to
display work state, such as PWR,
RXD,TXD, SYNC, TEST...
E1 (G.703) interface comply with ITU-T G.823, G.703 and G.742, it can be impedance balance120ohm (RJ45) or unbalance 75ohm (BNC)
The requirements to the fiber can be single mode/multi mode, single core/double core,
SC/FC/ST, 2km/20km/40km/60km
Power supply: AC 220V or DC -48V.
Overview:
FME-2 provides two interfaces of E1(g.703) or V.35, and the rate to every transmitting channel of E1 or V.35 can be up to 2Mbps. It was made by ASIC circuitry technology, we can also call it " PDH"
Obviously, the advantage of this
equipment is reduced the cost. It can achieve fiber to V.35 directly in stead of using the PDH and converter. What's more, the
clock (slave) of local FME-2 will automatically follow the
clock (internal/external) of
remote FME-2 ,so it's very easy to operate.
Specification:
Fiber optic type: 8.3/125um 8.7/125um 9/125um 10/125um
Transmission distance: 0-60KM
Fiber optic interface:SC
Length of working wave: 1310nm/1550nm
Transmitting
electrical level: 0-6dBM
Receiving sensitivity: -36dBm
Decaying1310nm window 0.4dB/km,
1550nm window 0.25dB/km
Data interface: V.35/E1 (G.703)
Data rate: N*64Kbps (N=1-31): 2048Kbps
Transmission mode: Synchronous
Line interface: Balance120ohm (RJ45)
Unb
| Place of Origin: | China(Mainland) |
|---|
| Brand: | VeeVOM |
|---|
| Payment Terms : | T/T |
|---|
| Price Terms : | FOB |