Portable load break tool,Loadbuster,pull-rod

Description:


Break pull-rod as an light open circuit tool,it's convenient to operate,use together with insulating switch,current breaker and power fuse. it's load switch capability can be available for kinds of equipments of nominal value 34.5KV,600A,max value 900A in the distribution system.



ATTACH
Reach across the front of the cutout and attach Loadbuster's anchor to the attachment hook on the far side of the cutout,and then engage its pull ring with Loadbuster's pull-ring hook.Loadbuster's pull-ring latch prevents inadvertent disengagement of the cutout pull ring and Loadbuster's pulling hook.

PULL
A firm,steady downward pull on Loadbuster-to its maximum extended length-opens the
cutout in the normal manner as the current is diverted through Loadbuster.At a
predetermined point in the opening stroke,Loadbuster trips,breaking the circuit
positively.

REMOVE
Loadbuster is disengaged by first removing its anchor from the cutout attachment
hook.Then, with the blade in the open position,Loadbuster is removed from the pull ring with a simple "roll-off"motion.

Place of Origin:	China Zhejiang
Brand:	DONGGAO