CDMA Modem

Description:
INTRODUCTION:
Saro 6200 CDMA modem offers reliable wireless communications in a complete and compact package that is ready to use in your application. Working with Saro Wireless Facility for CDMA modem, you can easy to build up a CDMA network. The full feature set of the modem makes it ideally suited to wireless voice and data solutions, such as remote metering, security, and vehicle tracking.

FEATURES:

Dual band GSM module (GSM/CDMA2000 1x) designed for M2M and automotive applications.
Complied with FCC/SAR and CDG 1/2&3 standard
Less than 3.5mA current is required during the idle mode.
Remote control by AT commands
Always online and operation mode selection
Watch dog design, ensure modem alive
Dialup with Saro Wireless Facility software
Standard RS-232 interface using 9 pin D connector provided with the device for communication.
Modem can be linked to a PC or a micro-controller based embedded system for sending SMS.
Data circuit asynchronous, transparent and non-transparent upto 14400 bits/s and baud rate of 300 to 115,200 bits/s
Coding schemes: CS1 to CS4.
Point to Point(MT/MO) and Cell Broadcast.
Latch type SIM holder (3V SIM interface).
TECHNICAL SPECIFICATIONS:

FEATURES VALUES

Working Frequency
800/1900 MHz.

Noise
<-79dBm.

Transmission Power
33dBm +/-2dBm.

Receiving Sensitivity
-104dBm.

Working Temperature
-30C to 65 C.

Storage Temperature
-40C to 85 C.

Dimensions
90mm X 56.2mm X 20mm

Transmitting Current
<=2A (peak).

Receiving Current
<=80mA(peak).

Working Humidity
10% ~95% relative humidity without condensation.

Interface
RS-232, DB9 connector.

Interface Rate
300 to 115,200 bits/s.

Power Supply
5 V to 35V DC,2A peak.



APPLICATIONS:

Pre-stored messaging
Remote home appliance control.
Industrial warning system.
Automatic Meter Reading (AMR).
Fleet/Traffic Management (with optional GPS integration).
Security Systems
Remote Data logging and reporting.
Low cost router.
Remote monitoring of Vending machines.
PACKAGING LIST:

CDMA modem.
0dBi Antenna( Magnetically mount or fixed screw mount). Optional 3,5,10 dBi antenna.
RS-232 connecting cable.
Universal AC adapter.
Software CD.