Phoenix Black Flasher Box

Description:
Features:
1) Cables included
2) It contains FLS4S + PKD1 + PKD1 RD, so you can use original Nokia Phoenix (DCT4
and WD2) + original Wintesla (DCT3) and also flashing 6630 and 9500
3) Extra added unlocking for DCT3 and DCT4
4) Note: 6630 unlock is not supported
5) Flashing 6630 by DKU2
6) 3 devices in one: FLS-4, PKD-1 (normal) or PKD-1RD (research and development
dongle). In FLS-4 mode the license counter is set to 1000 units and stopped! Also
some limited FPS-8 functions enabled (flashing too). It can use FPS-8 menu for
flashing when in PKD-1 mode
7) More detailed information than in FLS-4 mode when flashing in FPS-8 mode. Work
as PKD-1RD (more menus enabled in Wintesla/Phoenix) RD option in flash menu for
ADSP erase and blank check. TDMA, CDMA, WCDMA flash, repair, tuning, calibrate
and Bluetooth and ADSP repair and flash
8) It comes with small maintenance software which can do the following:
a) Set FLS / PKD dongle serial number to ANY value, 5 digits and / or 6 digits.
This is for prevent locking specific serial number(s) in future Phoenix updates
which will be released by Nok
b) Enables / disables FLS-4 down counter stop function (Maybe future updates of
Phoenix software will no more allow stopped counter)
c) Set FLS-4 counter to any value between 1 and 16777215
9) Usually Phoenix software is updated by Nokia to support new phone types / models
before these phones reach the market. So, no more waiting on 3rd party softwares
to receive updated software for new models. Usually this takes long time, because
the programmer(s) of 3rd party software need to receive the new phone model and
do some research to update the software. Can be used for many things than any
other 3rd party software, like calibrate, tuning, testing, increase emission power...
10) For some operations additional equipment is needed: RF generator, jig test,
frequency counter. Also, any 3rd party software just increases the programming
bugs, because all of these softwares are based on research made on original Nokia
Phoenix tools
11) Enable user to work with different Nokia phone platforms: GSM, EGSM, TDMA,
CDMA, WCDMA
12) All third party flashers cannot do many service adjustments nor diagnostics, not to
mention that they cannot be compatible with new upcoming models of Nokia
phones. Implement virtual COM port with full MBUS / FBUS specifications, allowing it
to be used with much free software already available for DCT3 / DCT4 phones...
13) Strong protection against cloning by using IBM BlueZ smart card platform
14) All boxes are fully tested and quality controlled using JTAG technology

Place of Origin:	China