Plastic Additives -- Sell Superplasticiser Wih Low Chloride And Low Alkali

Description:
Applications
1. Widely used in pre-cast& ready-mixed concrete, armored concrete and pre-stressed reinforced concrete for large construction projects such as dam and port construction, road building and dwelling house erection etc.
2. Appropriately utilized for centrifugal vapor-cured concrete formulations.
3. Applied to national key projects bearing good durability and long-term stability indicating properties.

Properties, features& characteristics
1. Appearance: Light brown powder& dark brown liquid. Non-poisonous, odorless, non-flammable and non-corrosive to steel bars.
2. Plasticity: As a conditon of blending in which amount of cement and collapsibility are fixed aforehand, water can be decrease by 10-30% when it si added at 0.3-1.5%. At the early stage, compression strength is increased rapidly and at the end largely when it is added at standard blend dosage. Statistically, compression strength on the 1st day, the 3rd day and the 28th day after single application is increase b 70-100%,60-80% and 25-50% respectively. As the result, compression strength, tensile strength, buckling strength and modulus of elasticity can be improved to some extent.
3. At the time it is fabricated by centrifugation, slurry loss is slight while notable vapor cure effect occurs. Site and modulus utilization can be effectively accelerated. At the end of application, compression strength is practically improved.
4. Superplasticiser wih low chloride and low alkali is widely used in largescale dam and bridge constructions as well as skyscrapers.

Directions
1. Liquid agent is more effective than the powdery.
2. Solutions can be prepared accordingly and diluted to desired concentration levels. When the solid is added directly, and extra 30-second agiattion is required.

Packing, transportation and storage
1. For powdr: Woven bag with plastic liner. Net weight:25kg±0.13 kg or 50kg±0.25kg for liquid: Sealed plastic drums to prevent accidental leakage and evaporation. The material can be delivered or transported by tank car.
2. Cautions should be taken to prevent from being torn by sharp-ended objects while pakages are transferred or delivered. When being contaminated by high humidity or moisture in case of leakage, it can be prepared in prescribed ways for further use without surrendering any effect.
3. It should be stored in a dedicated warehouse that is well-ventilated and relatively dry. It remains effective for one year. At the expiration, it can be used again if the testing results fall within the established range. Send a message directly to this member