0.8kg Automatic Fire Extinguishing Device

Product feature:

1. Strong targeted: Through a large number of data surveys, for storage shelves, lockers, charging, stations/boxes /piles and other smalland easy to fire space, the product's outline design suitable and has the fire extinguishing effect.

2. Rapid response: In the case of an emergency fire, the automatic fire extinguishing device can be triggered the fire extinguishingmechanism when the flame touch it, and spray out the ABC chemical powder (NH₄H₂PO₄) within 2~3 seconds to extinguish the fireachieve the purpose of ensuring the safety of life and property.

3. Simple operation: (l) Just instal the automaticfire extinguishine device in advance in the position ease to fire, in the case of the firecan efectively control the it; (2) The automatic fire extinguishing device is small outline, suitable for placing in all kinds of smallspacesand can reactin time when the tire occurs.

4. Easy to clean up: After the tlame is completely extinguished, the powder residue can be cleaned by vacuum cleaner or other tools. Easto clean up; Aiter the flame is completelv extinpuished, the powder residue can be cleaned by vacuum cleaner or other tools.

Installation instructions:

1. Place the device to the intended installation place then make makings for the bracket holes on the surface. With a drill make holes on the markings same size as the screws anchors.

2. After the expansion bolt is inserted into the hole, place the device in the installation position; Pass the screw through the gasket andmounting hole of the bracket and screw in the expansion bolt.
(*:The 3M sticker or magnet product can be stick directly in the target position)

Matters need attention:

1. The automatic fire extinguishing device is used to extinguish fire only. Cannotbe used for other purposes.

2. The automatic fire extinguishing device should be stored in normaltemperature and dry environment.

3. Do not intentionally throw or ignite the automatic fire extinguishing device.

4. Do not put the product in the water to prevent damage to the product fireextinguishing mechanism.
5. Optional damage, dismantle, change the product is prohibited.