Swipe or use the arrows to view product images.
1.2mm 1.5mm Adhesive Bitumen Flashing Tape for Waterproofing
| Price | $4.50 |
|---|---|
| Min Order | 1000 Rolls |
| Availability | In Stock |
| Shipping From | Liaoning, China |
| Popularity | 507 people viewed |
Model NO.:
Tape-1
After-sales Service:
3-5years
Certification:
ISO, MSDS
Material:
Bitumen
Top Surface:
Aluminum Foil or Customized
Bottom Surface:
PE Film
Property:
Waterproofing
Where to Use:
Roof
Customized:
Yes
Exposed Condition:
UV Resistant
Type:
Roofing and Waterproofing
Ceiling Tile Shape:
Roll
Thickness:
1.2mm
Surface Treatment:
Roll Coated
Function:
Waterproof
Usage:
Outdoor, Indoor, Roofs, Vehicles, Pipes, Chimneys, Tanks, etc
Warranty:
3-5years
Ceiling Tile Type:
Customized
Color:
Colored
Trademark:
EONZEAL
Transport Package:
Cartons
Specification:
50mm*10m, 100mm*5m, or customized
Origin:
China
Product Description
Adhesive waterproof flashing tape
Description
Self-adhesive bitumen flashing tape is a sealing strip, surface with aluminum or polyethylene(PE), high-performance cross laminated film, backed with rubberized bitumen glue. It is quick and effective method of sealing and repairing that produces a lasting protection in all climates. Include single sided adhesive and double sided adhesive.
Application
1. Replacement or repair of flashing
2. Extensions, porches, window frames and chimneys
3. Caravans and conservatories
4. Seals capping bolts and roof ridges
5. Guttering down pipes, skylights
6. Sealing parapets, valley gutters
7. Roof repair of portable building
Features
1. Provides an instant seal
2. Easy construction, be applied by hands pressure only
3. Safe application, without pollution4. Available in wide range of size
Size
| Thickness(mm) | Width(mm) | Length(m) | Remark |
| 0.8 | 100, 300 | 10 | or customized as required |
| 1.2 | 100, 300 | 10 | |
| 1.5 | 100, 300 | 10 |
Construction
1. Application temperature should be between 5ºC to 45ºC
2. According to required length cut the pieces to the desired and and size.
3. Place the pieces of membrane on the area to be covered and check whether they match will be profile of the marked substrate.
4. Peel off the release film and carefully place the membrane so as to ensure a minimum of 50mm overlap and then smoothen the membrane from the center to the edges in order to drive out entrapped air. It is easy to applied to provide instant seal.
Storage & Transportation
Should be stored under cover, out of direct sunlight and protect from extreme temperature; In tropical climates the product must be stored in an air-condition environment, Self life is up to 12 months when stored as per-recommended storage condition.
- Similar Products