Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

1-Plate Electric Waffle Baker (ET-HF-1)

Price $49.00
Min Order 50 Pieces
Availability In Stock
Shipping From Guangdong, China
Popularity 326 people viewed
Model NO.:
ET-HF-1
Power Source:
Electric
Timing Device:
With Timing Device
Type:
Baker
Voltage:
220V
Customized:
Customized
Size:
375*250*250mm
Material:
Stainless Steel
Power:
1kw
Certifictation:
CE
Power Supply:
220V/50Hz
G.W:
8kg
Packing Size:
400*300*270mm
Trademark:
ETON
Transport Package:
Carton and Wooden
Specification:
375*250*250mm
Origin:
Guangdong China
HS Code:
84198100
Product Description

Name: 1-Plate Waffle Baker
Dimension:375*250*250mm
Power: 1kW
Volts: 220v
Weight: 7.4kg
Speciality: All stainless steel body with L shape special design, diameter of baker is 178mm,
Temperature and time setting.




The use of notes:
1, the supply voltage must match the rated voltage.
2, three-prong outlet is installed near the equipment with a well-grounded.
3, the device temperature was adjusted at 250 ºC ± 5%.
4, the device has a time-setting, only time prompts, and electrical properties of the device is not linked.
 
Instructions for use:
1, plug in the power outlet, press the power switch, indicator lights, rotate the thermostat knob to set the desired temperature, the device begins to heat, when the temperature reaches the set temperature, the machine can automatically stop heating, when the temperature is low at the set temperature, can automatically power, heated again, so the cycle of work, to keep the temperature constant within a set range.
2, the maximum temperature for about 15 minutes from the time required to press the power switch until the furnace temperature reached 300 ºC.
3, after the device temperature reaches 250 ºC, the first light in the mold coated edible vegetable oil, then make a slurry within the template upside down, cover the lid, adjust the settings on the right time (time setting range 0 ~ 5 minutes, set the time at the discretion of the operator). When the time reaches the set time, the furnace issued a "ding" sound sound, prompts the operator, production time has come to make complete. You can make the next food. When the food all the production is completed, the power should be cut off.
4, may be interested in from the set time based on food color paste formulation different and customers
Line set, in general, the longer the deeper the color, whereas the more light color, but not too short, otherwise unfamiliar food, no color, and unsanitary.
5, the cleaning of the equipment: This device can be used with wet towels cleaning solution for cleaning,
But we can not use water to clean, but not soaked in water to clean, or easy to damage the electrical performance of the machine, prone to accidents electricity.
 
General failure to check:
 

Malfunction:

Reason:

Remedy:

Power on, press the switch, indicator light, set the temperature, but not heat

1. Thermostat  damage.
2. There is a heating pipe blown.

1. Replace the thermostat.
2. Replace blown electric tube (heating pipe has two, each 110-volt, 220-volt series use)

Power on, press the switch, indicator light, temperature rise can not be controlled.

Thermostat damage

Replace the thermostat

Power on, heating properly, but the indicator does not light

Indicator damage

Replace indicator

Power on, press the switch, the indicator does not reveal their unheated

Power is not normal, no power, or blown fuse

Check the power supply is normal or replace the fuse so

  • Similar Products
Full Page Contact Supplier