100ml Multi-Surface Glass Oil Film Remover and Protective Coating

Glass Oil Film Remover Product Manual

Product Name: Glass Oil Film Remover

Product Overview:
This Glass Oil Film Remover is specifically designed to effectively remove stubborn oil stains, grease, and smudges from glass surfaces. It is formulated with powerful cleaning agents that penetrate deeply into the surface to lift and dissolve oil films, leaving your glass clean, clear, and streak-free.

Key Features:

• Deep cleaning formula that effectively removes oil films and stains.
• Non-abrasive and safe for use on all glass surfaces.
• Pleasant scent for a fresh-smelling environment.
• Easy to use spray bottle design.

Ingredients:

• Surfactants
• Solvents
• Cleaning agents
• Deionized water
• Fragrance

Directions for Use:

1. Shake the bottle gently before use to ensure the ingredients are mixed evenly.
2. Spray the Glass Oil Film Remover directly onto the glass surface, focusing on the areas with oil stains or smudges.
3. Allow the product to sit on the surface for a few seconds to allow the cleaning agents to penetrate and dissolve the oil film.
4. Use a clean, lint-free cloth or paper towel to wipe the surface in a circular motion, starting from the top and working your way down.
5. Flip the cloth or paper towel over frequently to avoid re-depositing dirt onto the glass.
6. Repeat the spraying and wiping process if necessary for stubborn stains.

Caution:

• Keep out of reach of children.
• Avoid contact with eyes. If contact occurs, rinse immediately with water.
• Do not ingest.
• Use in a well-ventilated area.
• Store in a cool, dry place.

Storage:
Store the Glass Oil Film Remover in its original packaging, away from direct sunlight and extreme temperatures.

Disposal:
Dispose of the used bottle and packaging according to local waste disposal regulations. Do not reuse or refill the bottle.