10m³ Vacuum Insulated Cryogenic Tank with 8bar Pressure

Technical Requirements

1.  Centralized gas supply system on pallets skid: collect storage tank, pressure build-up vaporizer, main vaporizer, and pipelines. The stored liquid can be directly vaporized into gas, making it convenient for users to use.
2. For the inner vessel of the storage tank, 100% Radiographic Testing (RT) is first performed on Category A and Category B welded joints. This is followed by 100% Penetrant Testing (PT) on all welded joints. After ensuring that the non-destructive testing results are qualified, a pneumatic test is conducted on the inner vessel. Finally, each weld and joint is subjected to a leak test using a helium mass spectrometer leak detector. ,AB100%(RT),100%(PT)
3. The finished paint film on the outer surface of the storage tank is dense, firm and reliable, and the dry film thickness of the paint is greater than 200 µm.
4. The tank needs to be replaced with nitrogen before leaving the factory. Fill the interior of the liquid container with 0.03~ 0.05Mpa pressure nitrogen gas for protection. ,0.03~0.05Mpa.
5. The installation of LIN mircobulk tank does not require a foundation and can be directly placed on the ground for use with low maintenance costs. It is widely used: in the field of scientific research, it provides a stable low temperature environment for low temperature experiments, superconductivity research, biological sample preservation, etc.; in industry field, it is used to protect electronic components from oxidation during welding and packaging in the electronics industry; and it can be used as a purge and replacement gas in chemical production.