Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

1150-1280MHz 53dBm 200W RF Power Amplifier

Price $1500.00
Min Order 1 Piece
Availability In Stock
Shipping From Guangdong, China
Popularity 424 people viewed
Model NO.:
HPA-W53(1150-1280MHz)
Use:
Equipment
Screen Size:
No Screen
Certification:
CE
Warranty:
2 Years
Chip:
GaN
Weight:
1.5kg
Packing Size:
250X180*50mm
Material:
Copper Aluminium
Technology:
Alc
Tech:
Temperature Compensation
Temperature:
-25 to +75 Celsius Degree
Trademark:
OEM
Transport Package:
Carton
Specification:
200x140x25mm
Origin:
Shenzhen
HS Code:
8517799000
Product Description
Main Specification
 
No.ItemDescription
1Frequency Range1150-1280MHz,  1550-1620MHz or Customized
2Pout>53dBm
3Pin range0dBm
4Gain>53dB±1dB 
5RF Port VSWR≤1.5, 50 Ohms
6Working Voltage<16A @28VDC±1V
7RF Input PortSMA-Female
8RF Output PortN-Female or SMA-Female
9Spurious>60dBc
10DimensionType A180*155*25mm (Exclusive Connector)
Type B155*150*25mm (Exclusive Connector)
11Power Supply PortDSUB
12Working Temperature-25----+65ºC
13ProtectionShutdown more than 75ºC, auto-restart less than 50ºC
Shutdown over High-VSWR
14I/OParallelTTL, DB15 Female
SerialRS485

I/O Port (Default): Parallel DB15 Female
DB15 FemaleDescriptionIN/Out(D/A)
PIN6Preset (When protection occurs,  input a pulse signal to reset PA)IN, Data
PIN7Pr (reversed RF Power, 0-5V)Out, analog
PIN10Pf (Forward RF Power, 0-5V)Out, analog
PIN11EN (5V: PA OFF; Hang in air or grounding: PA ON)IN, data
PIN12TA (Temperature alarm, Alarm: 5V, Normal: 0V)Out, data
PIN13VA (VSWR Alarm, Alarm: 5V, Normal: 0V)Out, data
PIN14Tc (Temperature:0.01V/1ºC,  0.75V @25 ºC )Out, analog
PIN15GNDGND

Feature:
  1. Pout is stable over -20~65ºC
  2. Efficiency is more than 30% for 200W
  3. Over-high VSWR to avoid or reduce the damage from any mismatch
  4. Over-high temperature protection, Shutdown more than 75ºC, auto-restart less than 50ºC
  5. DB15 serial port is standard, DB9 Parallel RS485 is optional(China Mobile Protocol)
  6. Remark
  7. PA should be operating on an appropriate radiator, otherwise it will shut down by over high-temperature.
  8. Pout port cannot open or short, otherwise may burn and damage PA.
  9. Pout port should should be connect to a probably Load, Attenuator or antenna (50 ohms, more than 100W handling Power, lower than VSWR 2.0). 
  10. The power supply range and polarity of power supply must be correct, otherwise will damage the PA.
  11. Pout probably lower than the rated power when input Power less than 5dBm; PA probably is damaged if Pin is higher than 12dBm
  • Similar Products
Full Page Contact Supplier