Swipe or use the arrows to view product images.
11kv-24kv Three-Phase Outdoor Metal Oxide Surge Silicon Rubber Lightning Lighting Arrestor Arrester Price
| Price | $100.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 499 people viewed |
Model NO.:
YH10W
Type:
Power Source Arrester
Structure:
Zinc Oxide Arrester
Installation:
Parallel Arrester
Application:
Substation
Size:
Small
Operation Voltage:
High Voltage
Shape:
Spiral
Material:
Metal Oxide
Certification:
ISO9001, CCC
Ambient Temperature:
-40ºC-+40 ºC
Altitude:
Not Higher Than 3000 M
Rated Frequency:
50Hz or 60Hz
Maximum Wind Speed:
35m/S
Trademark:
DGG or no brand or OEM
Transport Package:
PCB
Origin:
Zhejiang - China
Product Description
Our factory
We are professional manufacturer of current transformer ,voltage transformer, Vacuum Circuit Breakers/Recloser,Isolation switches,Dropout Fuse Cut-out,Lightning Arresters,High and Low Voltage Cabinets,Metering Devices,Power Distribution Transformers etc.
Metal Oxide Surge Arrester
The metal oxide surge arrester (MOA) is an advanced overvoltage protector in the world. The metal oxide resistors (MOV) adopt overvoltage limiter Technology. It has a good response to the steep front surge, excellent volt-ampere characteristics, and high discharge capability, which provides very consistent protection merit at steep front surge, lightning surge, and switching surge, and enhances protective capability.
The product has been confirmed by the Chinese National Center for quality supervision and testing of insulators and surge arresters. The technical performance of the product conforms to IEC60099-4 standard technical requirements.
All composite jacket MOAs can be equipped with disconnectors, which are generally installed on insulating supports. The upper part is directly connected with the low-voltage end of the arrester, and the lower part is connected with the grounding conductor.
When the MOA is damaged and an abnormal current occurs, the disconnector will automatically disengage. See the right figure for the working condition of the disconnector to enable the damaged MOA to exit the system. The dotted line in the figure shows that the grounding part is disconnected after the disconnection action.
Usage: Environmental Conditions
1. Ambient temperature: not higher than +40 ºC, not lower than - 40 ºC;
2. The altitude is not higher than 3000 m;
3. Rated frequency: 50Hz or 60Hz;
4. The voltage applied to the arrester for a long time shall not be higher than the continuous operation voltage of the arrester;
5. Maximum wind speed: 35m/s;
Model And Meaning
Outline And Installation Dimension
All products have undergone professional testing and certification.
Our customers are located all over the world
Photos of Product
We are professional manufacturer of current transformer ,voltage transformer, Vacuum Circuit Breakers/Recloser,Isolation switches,Dropout Fuse Cut-out,Lightning Arresters,High and Low Voltage Cabinets,Metering Devices,Power Distribution Transformers etc.
Metal Oxide Surge Arrester
The metal oxide surge arrester (MOA) is an advanced overvoltage protector in the world. The metal oxide resistors (MOV) adopt overvoltage limiter Technology. It has a good response to the steep front surge, excellent volt-ampere characteristics, and high discharge capability, which provides very consistent protection merit at steep front surge, lightning surge, and switching surge, and enhances protective capability.
The product has been confirmed by the Chinese National Center for quality supervision and testing of insulators and surge arresters. The technical performance of the product conforms to IEC60099-4 standard technical requirements.
All composite jacket MOAs can be equipped with disconnectors, which are generally installed on insulating supports. The upper part is directly connected with the low-voltage end of the arrester, and the lower part is connected with the grounding conductor.
When the MOA is damaged and an abnormal current occurs, the disconnector will automatically disengage. See the right figure for the working condition of the disconnector to enable the damaged MOA to exit the system. The dotted line in the figure shows that the grounding part is disconnected after the disconnection action.
Usage: Environmental Conditions
1. Ambient temperature: not higher than +40 ºC, not lower than - 40 ºC;
2. The altitude is not higher than 3000 m;
3. Rated frequency: 50Hz or 60Hz;
4. The voltage applied to the arrester for a long time shall not be higher than the continuous operation voltage of the arrester;
5. Maximum wind speed: 35m/s;
Model And Meaning
Outline And Installation Dimension
All products have undergone professional testing and certification.
Our customers are located all over the world
Photos of Product
- Similar Products
$30.00
100 Pieces (MOQ)
Class C Protection Three Phase 275VAC Surge Protector
Guangdong Foshan Kestar Electronic Co., Ltd.
$40.00
100 Pieces (MOQ)
12kv 10ka Metal Oxide Polymeric Lightning Surge Arrester
Wenzhou Yikun Electric Co., Ltd.
Negotiable
1 Piece (MOQ)
N Type Coaxial Surge Protector (DC~2500MHz)
FOSHAN FATECH ELECTRONIC TECHNOLOGY CO.,LTD
$15.00
100 Pieces (MOQ)
Polymeric Surge Arrestor Lightning Impulse
YUEQING REACON ELECTRIC CO., LTD.
$10.40
1000 Pieces (MOQ)
Factory Made Metal Insulated Oxide Lightning Arrester
Zhejiang Xirui High-Voltage Electric Co., Ltd.