13.56MHz IC RS232 Reader

wholesale 13.56MHZ ISO14443A rfid reader wiegand 26 bits wiegand 34 bits card access control system

Specification

• Less than 0.2 second Response Speed
• Less than 0.5 seconds Proximity Time Distance
• 2-15cm Proximity Range
• Support 13.56Mhz MF ISO14443A
• Built-in Antenna
• Built-in LED (Double Color LED)
• Built-in Loud Speaker (Buzzer)
• DC 12V Working Voltage,70mA Working Current
• 100 Meters Communication Distance
• Real Time Data Transfer
• Black Color
• PVC Case Material (Black Resin for Water-Proof Function)
• 76*114mm*16mm

 Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

Red       DC 12V

Black      GND

Green       D0

White       D1

Blue         LED 

Yellow       Beep 

Grey        WG34 ( if you need wiegand 34 output , kindly connect the grey cable to GND)

Notice

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires

Packing list for RFID Reader

1* RFID Reader

1* User Manual

1*Gift Box

Remind:

1.The package not including any screws .

2.This reader not support NFC cards and tags .

Application

Certification


Wire diagram

Photo