$85.00
5 Square Meters (MOQ)
Double Layers PCB for Car
Zhejiang Dejia Electronics Technology Co.,Ltd.
Swipe or use the arrows to view product images.
13s 15A BMS for Battery Pack Lithium LiFePO4 BMS Circuit Board for E-Bike
| Price | $8.00 |
|---|---|
| Min Order | 5 Pieces |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 435 people viewed |
Model NO.:
PCM-L15S15-E84
Metal Coating:
Copper
Mode of Production:
SMT
Layers:
Single-Layer
Base Material:
FR-4
Certification:
RoHS
Customized:
Customized
Condition:
New
Battery Series:
13s
Work Current:
15A
Specification:
108*70mm
Origin:
Shenzhen, China
HS Code:
8537109090
Product Description
We have over six hundreds of PCM/BMS series products for your choice, most of them widely used for Li-ion battery pack, Li-Polymer battery pack, LiFePO4 battery pack and so on.
Our main PCB/BMS normally adopt imported raw material for reliable quality, IC from Japan, MOS from USA, Components from Sumsang, Almost Zero RMA.
PCM or PCB ( protection circuit module or board ) is "heart" of Li-Ion battery pack. It will protect Li-Ion battery pack from overcharging, over-discharging and over-drain, therefore it is must have to avoid Li-Ion battery pack from exploding, firing and damage. For > 5 cells or 18.5V Li-Ion pack, you shall choose PCM with equilibrium function to keep each cell in better balance and good service life. For high voltage Li-Ion pack ( > 20 cell), you shall consider advanced BMS ( battery manage system) to monitor each cell's performance to ensure battery safer operation.
Our main PCB/BMS normally adopt imported raw material for reliable quality, IC from Japan, MOS from USA, Components from Sumsang, Almost Zero RMA.
| 13S Protection Circuit Module Specifications For 48V Li-ion Battery Pack | ||||
| PCM-L15S15-E84 (13S) | ||||
| No. | Test item | Criterion | ||
| 1 | Voltage | Charging voltage | DC:54.6V CC/CV | |
| Balance voltage for single cell | 4.20±0.05V | |||
| 2 | Current | Balance current for single cell | 42±5mA | |
| Current consumption | ≤150μA | |||
| Maximal continuous charging current | 5A | |||
| Maximal continuous Discharging current | 20A | |||
| 3 | Over charge Protection | Over charge detection voltage | 4.25±0.05V | |
| Over charge detection delay time | 0.5S-2S | |||
| Over charge release voltage | 4.15±0.1V | |||
| 4 | Over discharge protection) | Over discharge detection voltage | 2.75±0.1V | |
| Over discharge detection delay time | 50-300mS | |||
| Over discharge release voltage | 3.0±0.1V | |||
| 5 | Over current protection | Over current detection current | 100±20A | |
| Detection delay time | 100ms-300ms | |||
| Release condition | charger release | |||
| 6 | Short protection | Detection condition | Exterior short circuit | |
| Detection delay time | 200-800us | |||
| Release condition | Cut load | |||
| 7 | Resistance | Protection circuitry(MOSFET) | ≤20mΩ | |
| 8 | Temperature | Operating Temperature Range | -40~+70ºC | |
| Storage Temperature Range | -40~+125ºC | |||
| The above parameters test temperature is 25ºC, if the temperature is not 25ºC, there will be a certain deviation. | ||||
PCM or PCB ( protection circuit module or board ) is "heart" of Li-Ion battery pack. It will protect Li-Ion battery pack from overcharging, over-discharging and over-drain, therefore it is must have to avoid Li-Ion battery pack from exploding, firing and damage. For > 5 cells or 18.5V Li-Ion pack, you shall choose PCM with equilibrium function to keep each cell in better balance and good service life. For high voltage Li-Ion pack ( > 20 cell), you shall consider advanced BMS ( battery manage system) to monitor each cell's performance to ensure battery safer operation.
- Similar Products
Negotiable
50 Pieces (MOQ)
LCD Controller Board PCBA with 2 Channel NTSC/PAL CVBS Input
Shenzhen Boxing World Technology Co., Ltd.
$85.00
5 Square Meters (MOQ)
1.2mm Black LED Double Sided PCB
Zhejiang Dejia Electronics Technology Co.,Ltd.