Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Electrical & Electronics > Optical Fiber, Cable & Wire > PV Cable
Swipe or use the arrows to view product images.

1500V 4mm2 6mm2 Single Core Electrical Waterproof Solar PV Cables for Solar Systems

Price $1.50
Min Order 2000 Meters
Availability In Stock
Shipping From Jiangsu, China
Popularity 449 people viewed
Send Inquiry View Full Page
Model NO.:
TUV IEC 62930
Application:
Solar System
Material Shape:
Round Wire
Sheath Material:
Xlpo
Insulating Material:
XLPE
Conductor Type:
Copper
Brand:
Yonghao
Certification:
TUV,UL,IEC,CE, CPR,ISO, RoHS,
Wire Core Material:
Tinned Copper
Incoterms:
Fob,CIF,CFR,DAP
Color:
Red,Black,Other
Make:
Suzhou Yonghao Cable Co.,Ltd.
Transportation:
Sea, Land and Air
Transport Package:
Pallet, Drum, Reel, Wooden Box
Specification:
PV1-F 4mm2 6mm2 Double Insulation
Origin:
China
HS Code:
85446090
Product Description

Use
for Solar Plants Distribution System
Ambient Temperature
-40ºC~+90ºC
Test Voltage
6500V, 50Hz, 5min
Ambient Temperature
25 Years (TUV)
Origin
China
Production Capacity
1200km per day
Certification
TUV
Product Name
DC Solar PV Cable
Color
Black ,Red ,Brown,Grey Or Customized
Specification
1.5mm2, 2.5mm2, 4.0mm2, 6.0mm2, 10.0mm2, 16.0mm2, 25.0mm2, 35.0mm2
Number of Cores
Single Core,Two Core
Transport Package
Drum or Roll
Rated voltage
AC:Uo/U=0.6/1.0KV DC:1.0KV
Voltage test on completed cable
AC:6.5KV DC:15KV,5min
Weathering /UV-resistance
HD605/A1
ACID and Alkali resistance
EN60811-2-1
Cold bending test
EN60811-1-4
O-zone resistance at complete cable
EN50396
Flame test
IEC60332-1
Max Temperature at conductor
+120ºC
Service Life
25 years(-40ºC~+90ºC)
Approvals
TUV Rheinland



In the solar photovoltaic power generation system in the low-voltage DC transmission part of the cable, because the use of the environment and technical requirements are different, the connection of different parts have different requirements, the overall factors to consider are: cable insulation performance, heat resistance and flame retardant performance, aging performance and wire diameter specifications.
1. The connection cable between the solar cell module and the module is generally connected directly by the connection cable attached to the module junction box. When the length is not enough, a special extension cable can also be used. According to the different power size of the component, this kind of connecting cable has a cross-sectional area of 2.5m square meters, 4.4m square meters, 6.0m square meters and other three specifications. This kind of connecting cable uses double insulation outer skin, has superior protection against UV, water, ozone, acid, salt erosion ability, superior all-weather ability and wear resistance.
2. Use a multi-strand flexible cable that passes the UL test to connect the battery to the inverter. Choosing short and thick cables can reduce system losses, improve efficiency, and enhance reliability.
3. The cables connecting the battery array to the controller or DC junction box must also use multi-strand flexible wires that pass the UL test. The cross-sectional area depends on the maximum output current of the battery array.
The cross-sectional area of the DC cable at the named location shall be determined according to the following principles: Cables connecting solar modules, batteries and batteries, and AC load cables. Generally, the rated current of the cables is 1.25 times of the maximum continuous working current of each cable. For connecting cables between the solar cell array and the square array, and connecting cables between the battery (group) and the inverter, the rated current of the cable selected is generally 1.5 times of the maximum continuous working current in each cable.

  • Similar Products
Full Page Contact Supplier
↑