Swipe or use the arrows to view product images.
15kv-24kv Power High Voltage Current Limiting Porcelain Drop out Fuse Cutout Switch Fuse Hold Electrical Fuse HRC Fuse
| Price | $30.00 |
|---|---|
| Min Order | 100 Pieces |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 488 people viewed |
Model NO.:
YNC1-15
Breaking Capacity:
High
Type:
Current Fuse
Usage:
High Voltage
Shape:
Dropout
Fusing Speed:
K
Fusing Device:
Fuse Element
Rated Voltage:
15kv-24kv
Trademark:
YN
Transport Package:
Carton&Pallet or Wooden Case
Specification:
100A/200A
Origin:
China
HS Code:
8535100000
Product Description
Outdoor Porcelain Ceramic Drop out Fuse Cutout for Electric Power Transformer
Drop-out fuse cutout and load switching fuse cutout are of outdoor used high voltage protective device. To be connected with incoming feeder of distribution transformer or distribution lines, it mainly protect transformer or lines from short circuit and overload, and on/off loading, current. Drop-out fuse cutout is composed of insulate insulator supports and fuse tube, static contacts is fixed on two sides of insulator support and moving contact is installed on two ends of fuse tube. Fuse tube is composed of inside arc-extinguishing tube. Outer phenolic compound paper tube or epoxy glass tube, load switching fuse cutout provides enforced elastic auxiliary contacts and arc-extinguishing enclosure switching on-off loading current.
At normally working via fuse link tightened the fuse tube is fixed to form up of close position. In case system occur faults, fault current result result in fuse melt immediately and take piece electric are, which let arc-extinguishing tube being heated and explode a lot of gas, This will produce high pressure and below of the are along with tube. After fuse link melt moving contact has no tightened strength again, mechanism is locked and fuse tube drop out, Cutout now is in open position. When it needs to switch off during cutout loading, operator shall via insulating operating bar pull the moving contact, at its beginning main contact and auxiliary static contact is contacted still, Whiling pulling the auxiliary contact is separated between auxiliary contacts there occur electric arc and the arc will be lengthened in arc-extinguishing enclosure gap and meanwhile arc-extinguishing explode gas to blow off the arc during current passing zero.
Main Technical Parametes
| Type | Rated voltage (kv) | Rated current (A) | Breaking current (A) | Impulse voltage (BIL) | Powerfrequency withstand voltage | Leakage distance (MM) | Weight (KG) | Dimension (CM) |
| YNC1-15/100 | 15-24 | 100 | 8000 | 125 | 45 | 320 | 7.5 | 50*36*12.5 |
| YNC1-15/200 | 15-24 | 200 | 10000 | 125 | 45 | 320 | 7.5 |
- Similar Products
$19.00
3000 Pieces (MOQ)
15kv-100A Porcelain Ceramic Drop out Fuse Cutout
Liling Sky Bali Industrial Co., Ltd.
Negotiable
100 Pieces (MOQ)
Low Voltage Pole Mounted Fuse Switch 400A (160A, 630A)
ZHEJIANG SMICO ELECTRIC POWER EQUIPMENT CO., LTD.
Negotiable
20 Pieces (MOQ)
DC1500V Nh00 - Nh3 Isolation Knife separator
ZHEJIANG FUERZI ELECTRIC TECHNOLOGY CO., LTD.