Swipe or use the arrows to view product images.
17.6/Cc ASTM-B777-15 Class2 Tungsten Based Shot (93WNiFe/WNiCu) for Military or Hunting
| Price | $150.00 |
|---|---|
| Min Order | 20 kg |
| Availability | In Stock |
| Shipping From | Heilongjiang, China |
| Popularity | 526 people viewed |
Model NO.:
WNiFe/WNiCu
Application:
Aviation, Electronics, Industrial, Medical, Military
Standard:
JIS, GB, DIN, BS, ASTM, AISI
Purity:
85-97%W, W-Ni-Fe, W-Ni-Cu
Alloy:
Alloy
Shape:
Round
Composition:
W Content: 85-97%, W-Ni-Fe, W-Ni-Cu
Density:
15.8-18.50 g/cm3
Diameter:
1.0mm-100.0mm
Surface:
Sinter State, Grind State
Transport Package:
Iron Drum
Specification:
Diameter: 4.0mm
Origin:
Mudanjiang
HS Code:
8101999000
Product Description
Introduction of Tungsten Alloy Balls (sphere)
Tungsten heavy alloys are usually consisted of W-Ni- Fe or W-Ni- Cu or even W-Ni-Cu-Fe, some tungsten alloy is added Co, Mo, Cr, etc. It could be made as many shapes. Tungsten alloy ball is in small volume with high density, which means it could be used in some fields need the little but heavy parts
- Diameter: 1.0mm-200mm
- Density: 17.0-18.50 g/cm3
- Composition: W content: 85-97%, W-Ni-Fe, W-Ni-Cu
- Surface: Sinter state, Grind state
- Product Standard: ASTM B 777-15
The main performance of the tungsten alloy
- High density;
- Good machinability;
- Good mechanical properties;
- High modulus of elasticity;
- High absorption capacity against χ-rays and γ-rays;
- Harmless to the health and environment.
Appliance of tungsten heavy alloy balls (sphere)
- Used as the shot of shotgun, hunting sphere,non-toxic hunting pellets
- Used as the parts for prefabricated fragments
- Used as armor piercing ammunition
- Used as Counter Weight for fishing
- Used as ballast for motorboat, sailboat, submarine
- Used as Kinetic energy penetrators for defeating heavy armor
Product Standard: ASTM B 777-15
| ASTM B 777 | Standard Alloys | Nonmagnetic Alloys | |||||||
| Class1 | Class2 | Class3 | Class4 | Class1 | Class2 | Class3 | Class4 | ||
| Nominal Tungsten | Weight% | 90 | 92.5 | 95 | 97 | 90 | 92.5 | 95 | 97 |
| Density | g/cc | 16.85 - 17.3 | 17.15 - 17.85 | 17.75 - 18.35 | 18.25 - 18.85 | 16.85 - 17.3 | 17.15 - 17.85 | 17.75 - 18.35 | 18.25 - 18.85 |
| Hardness | Rockwell C max | 32 | 33 | 34 | 35 | 32 | 33 | 34 | 35 |
| Ultimate Strength | Ksi | 110 | 110 | 105 | 100 | 94 | 94 | 94 | na |
| Mpa | 758 | 758 | 724 | 689 | 648 | 648 | 648 | na | |
| 0.2 % Offset Yield | Ksi | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 75 |
| Mpa | 517 | 517 | 517 | 517 | 517 | 517 | 517 | 517 | |
| Elongation | % | 5 | 5 | 3 | 2 | 2 | 2 | 1 | na |
General Standard:
| Grade | Composition | Performance | ||||
| Density g/cm³ | Hardness HRC | Tensile strength MPa | Elongation % | Impact toughness MJ/m² | ||
| W273 | 90WNiFe | 17.10±0.15 | ≥23 | ≥900 | ≥24 | ≥1.30 |
| W263 | 91WNiFe | 17.25±0.15 | ≥23 | ≥900 | ≥23 | ≥1.20 |
| W253 | 92WNiFe | 17.40±0.15 | ≥24 | ≥900 | ≥22 | ≥1.10 |
| W243 | 93WNiFe | 17.60±0.15 | ≥24 | ≥920 | ≥20 | ≥0.90 |
| W232 | 95WNiFe | 18.10±0.15 | ≥25 | ≥920 | ≥14 | ≥0.45 |
| W231 | 96WNiFe | 18.30±0.15 | ≥26 | ≥920 | ≥12 | ≥0.30 |
| W221 | 97WNiFe | 18.50±0.15 | ≥27 | ≥920 | ≥10 | ≥0.22 |
| WNiCu | 16.00-18.50 | ≥22 | ≥450 | 2-8 | ||
When inquiring please specify the following:
- Material: (E.g. Tungsten alloy W - 92%, W-Ni-Fe, W-Ni-Cu,etc.)
- Material density: We manufacture parts with a maximum density of 18.5 g/cc
- Sphere dimension: We manufacture spheres from 1 mm to 100 mm diameter
- Surface finish
- Order quantity
- Estimated annual demand
- Special packing requirements
- Price base: Please specify if parts are to be imported by express,air or sea
- Similar Products
$100.00
1 Piece (MOQ)
W>99.95% Tungsten Ring
Luoyang Tongchang Tungsten & Molybdenum Material Co., Ltd.