Swipe or use the arrows to view product images.
2022 Floor Standing Industrial Dry Cooling Tower
| Price | $2000.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Shanghai, China |
| Popularity | 525 people viewed |
Model NO.:
SHSL-D1-014-1X500F2
Type:
Air-Cooled
Cooling Water:
Industrial Water
System Type:
Closed System
Fans Species:
Frequency Fan
Noise Level:
Low
Application Fields:
Machinery
Certification:
RoHS, ISO
Condition:
New
Product Name:
2017 Floor Standing Industrial Air Dry Cooler
Cooling Capacity:
17.6kw
Air Flow:
8137CMH
Surface:
73m2
Power Supply:
380V-3pH-50Hz
Total Motor Power:
0.83kw
Total Current:
1.45A
Dry Weight:
75kg
Design Pressure:
2.0MPa
Testing Pressure:
2.5MPa
Trademark:
VENTTK
Transport Package:
Wrap Film/Pallet
Specification:
refrigerant unit
Origin:
China
HS Code:
8415901000
Product Description
2017 Floor standing industrial air dry cooler
Dry Coolers are widely used in refrigeration, air-conditioning, food processing, heating plants and power plants.
General productions:
Suitable environment
Dry Cooler series:D1 and D2 series.
Environment temperature: 35ºC.
Air does not contain chemical substances, corrosive gasses and dust-free;
Please specify requirements for explosion-proof upon order
Design Conditions: Design pressure 2.0MPa; Test pressure 2.5MPa
Medium: WATER
Working conditions:
Details:
Site assessment
Selected installation site must meet the following requirements:
Level Ground;
Ground or Floor strength able to support the wedight of equipment;
no obstructions at air outlet.
Upon confirming above conditions, take the following installation steps. Forklift or lifting product out of wooden pallets, loosen transport screw at stand and tighten after raising the screws to same horizontal plane as product. After moving product to the predetermined location, bolt tightly with large washer and spring washer.
Wiring
Power requirements:
Axial Fan power wiring: Axial fans are often using one phase or 3 phase motor. The 3 phase motor has two configuration, Y-shape and △Shape
Fan motor should have reliable power supply equipped with over voltage, under voltage and over current protection. Each fan is equipped with current protection settings. Internal thermal protection devise should be connected to the control lines to prevent damage to the motor due to over voltage, under voltage, lack of phase, contact failure. Motor wiring shall be installed according to the requirements when using two-speed motor.
Electrical Installation
Equipment commissioning
4.1 power on check
Check to ensure all requirements above are met. All requirements is to be met before trial run. Ensure all accessories are installed securely before powering on.
4.2 Power supply check
Ensure voltage and power supply matches name plate by measuring equipment and is safely grounded with less than 2ohm before power up.
4.3 Trial Operation
Ensure each fan is tighten and is not obstructed prior to commissioning. Rotation of the motor must be accordance with the factory specification. Ensure no jamming and free rotation to fan and motor.
Photos show:
Dry Coolers are widely used in refrigeration, air-conditioning, food processing, heating plants and power plants.
General productions:
Suitable environment
Dry Cooler series:D1 and D2 series.
Environment temperature: 35ºC.
Air does not contain chemical substances, corrosive gasses and dust-free;
Please specify requirements for explosion-proof upon order
Design Conditions: Design pressure 2.0MPa; Test pressure 2.5MPa
Medium: WATER
Working conditions:
| Environment | Specifications |
| Ambient Temperature 35ºC, Inlet Temperature 48 ºC,Outlet Temperature 39 ºC | D4 Series |
Details:
| Sign | Name | Function |
| A | Stand | Fix equipment |
| B | MetalSheet Casing | Galvanized Steel Coated Casing |
| C | Cooling Coil | Al Fin and Copper Tube |
| D | Fan | Low Energy consumption fan to maximize air flow and low noise |
| Drycooler | |
| Capacity:15KW | Medium: ethylene glycol 34 vol% |
| Surface reserve:5.7% | Inlet:45ºC |
| airflow:5810m³/h | outlet:40ºC |
| airinlet:32ºC | presure drop:0.52bar |
| altitude:1500m | volume flow:2.79m³/h |
| Fans(AC): 1piece3~400V50Hz | Noise pressure level:42dB(A) |
| data per motor(nominal data): | at a distance of:10m |
| speed:1180min-1/1350min-1 | Noise power level:73dB(A) |
| capacity(el) 0.55kw | E |
| current:0.90A | |
| total el power consumption:0.45KW | energy sfficiency class:E(2014) |
| casing:Galv.sheet.RAL 7035 | Tube: copper |
| surface:82m2 | fins:aluminum |
| tube volume:10.81 | connections per unit: |
| fin spacing:2.4mm | inlet:28*1.5mm |
| dry weight:96kg | outlet:28*1.5mm |
| Max.operation pressure:16bar | PED classification:Art.3.par.3 |
Site assessment
Selected installation site must meet the following requirements:
Level Ground;
Ground or Floor strength able to support the wedight of equipment;
no obstructions at air outlet.
Upon confirming above conditions, take the following installation steps. Forklift or lifting product out of wooden pallets, loosen transport screw at stand and tighten after raising the screws to same horizontal plane as product. After moving product to the predetermined location, bolt tightly with large washer and spring washer.
Warning |
| Minimize bias and ensure the level of the product during installation. Ensure tubes level and no loosen parts in dry cooler During installation, avoid weight of pipeline on the dry coolers. |
Wiring
Power requirements:
Axial Fan power wiring: Axial fans are often using one phase or 3 phase motor. The 3 phase motor has two configuration, Y-shape and △Shape
Fan motor should have reliable power supply equipped with over voltage, under voltage and over current protection. Each fan is equipped with current protection settings. Internal thermal protection devise should be connected to the control lines to prevent damage to the motor due to over voltage, under voltage, lack of phase, contact failure. Motor wiring shall be installed according to the requirements when using two-speed motor.
| warning |
| Motor overcurrent protection and built in thermal protection settings must be connected. Electrical connections must be completed by qualified professionals Ensure wiring are correct and accurate to prevent motor failure |
Electrical Installation
| Warning |
| Equipment installation must be done by qualified personnel Ensure all electrical circuits are installed in accordance GB 8877-88(household appliances installation, use, maintenance and safety requirements) or any other local regulations Equipment shall be safely grounded with resistance less than 2Ω Ensure all fan connecting cables are according to required standards of fan manufacturers. |
Equipment commissioning
4.1 power on check
Check to ensure all requirements above are met. All requirements is to be met before trial run. Ensure all accessories are installed securely before powering on.
4.2 Power supply check
Ensure voltage and power supply matches name plate by measuring equipment and is safely grounded with less than 2ohm before power up.
4.3 Trial Operation
Ensure each fan is tighten and is not obstructed prior to commissioning. Rotation of the motor must be accordance with the factory specification. Ensure no jamming and free rotation to fan and motor.
Photos show:
- Similar Products
$100.00
5 Pieces (MOQ)
Aluminum Oil Cooler Package for Pump Car (B1014)
Wuxi Zhengrui Heat Exchanger Co., Ltd.
$50000.00
1 Piece (MOQ)
Air Cooler for Cold Storage Air Cooler
Shandong Furunze Refrigeration Technology Co., Ltd.
$972.00
1 Piece (MOQ)
Bitmian Ant S19K PRO 120t Btc Asic Computer Server
Shenzhen Letine Technology Co., Ltd.
$50.00
5 Pieces (MOQ)
Oil Cooler for Engine Cooling System (H1001)
Wuxi Zhengrui Heat Exchanger Co., Ltd.