Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Security & Protection > Alarm & Security Systems > Alarm
Swipe or use the arrows to view product images.

2023 Fire Prevention Smoke Detector Safety Kit Alarm Wireless Smoke Sensor Home System

Price $12.50
Min Order 500 Pieces
Availability In Stock
Shipping From Zhejiang, China
Popularity 522 people viewed
Send Inquiry View Full Page
Model NO.:
TSS381D-HR
Type:
Smoke Alarm
Signal Transmission:
Wireless Alarm
Working Mode:
Active
Certification:
CE, ISO, RoHS, CCC, Bsi, NF
Application:
Indoor
Working Principle:
Electro-Optical Type
Alarm Volume (within 1m):
≥90dB
Receive Frequency:
433.92MHz
Certificate:
CE, Bsi, Ukca, NF, RoHS, Reach, ISO9001, BSCI
Special Features:
Wireless Type
Power Source:
DC 3V
Wireless Interconnection Function:
up to 40 Devices.
RF Function:
Radio Frequency 433MHz
Trademark:
JBE
Transport Package:
Carton
Origin:
Hangzhou, Zhejiang
HS Code:
8531100000
Product Description
Built-in 3V lithium battery photoelectric smoke alarm with RF function
Technical Specifications:
Power Source DC 3V batteryLow Voltage Threshold ≤2.6V
Operation Current ≤8uAHush time 8minutes
Alarm Sensitivity 0.10 - 0.16dB/mProduct service life >10 years
Comply with standardEN 14604:2005/AC:2008Humidity Range < 93% relative humidity (RH)
Alarm Current ≤60mATemperature Range 0ºC to 40ºC
Alarm Volume >85dB(A) @ 3 meters.Size120mm in diameter x 35.5mm depth
Sound Pattern (BI 0.5s - pause 0.5s - BI 0.5s - pause 0.5s - BI 0.5s - pause 1.5s, with the RED LED flash, repeat this alarm pattern)
Details of the product function:
Standby mode After the product is installed, if the smoke alarm device is operating properly, the red LED flashes once every 48 seconds
Alarm mode When the smoke alarm device detects particles of combustion and the concentration of smoke reaches the alarm threshold, the red LED will flash once per second with pulsating alarm until the smoke is disappeared.
Low battery mode When the battery voltage is below threshold, the red LED will flash once every 48 seconds with a sound of "chirp"
Fault mode If the alarm detection signal decays below threshold, the alarm chirp occurs without LED flashes every 48 seconds.
Silence mode Press the test button at least 2 seconds, it will go into silence mode for approx 8 minutes. That will desensitize the alarm sensitivity temporarily. At this time, the red LED will flash once every 8 seconds;
Non disturb mode When the alarm device is in low battery mode, in order to avoid disturbing your at night, Please press the test button for 3 seconds which will mute this warning tone for about 14 hours. After 14 hours, the warning tone will still go off. The red LED will flash once every 48 seconds during No disturb mode.
Test mode Test the unit to ensure operate properly by pressing the test button. At this time, the red LED will flash once per second with pulsating alarm until test button is released.
Wireless interconnection alarm sound mode BI - BI - pause 1.2s, with the red LED flash, this alarm pattern is repeated.
NOTE WEEKLY TESTING ONE TIME IS REQUIRED.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  • Similar Products
Full Page Contact Supplier
↑