230V Wholesale High Quantity Ceramic Ignitor for Wood Pellet Biomass Boiler

Specifications

Our ceramic heating elements consist of AL2O3 insulation ceramics with an integrated platinum conductor, and reach to a permanent operating temperature between 800°C and 1100°C

Ceramic hot surface igniters for pellet boilers need only approx. 1/10 of the energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 Watt. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions!

Application 

One special application area for the high-temperature heaters is in heating systems that use solid fuels such as wood pellets as the energy source. The challenge here is to ignite the biomass in a very short time while retaining very low emission values. This can only be achieved with a sufficiently high ignition temperature.1000°C, heats up the supply air in the shortest possible time to an extremely high temperature.

Our hot surface igniters are perfectly suited for this purpose. This special geometry of the cylindrical ceramic heaters, in combination with an extremely high surface temperature.

 Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible.