24V DC Submersible Fountain Pump (HL-450) Water Pump Set

Professionals for a variety of handicrafts, rockery, fountain garden dedicated, aquarium tank, water fountains, other decoration.

Fountain pump with different delivery heads, adjustable flow control. Perfect for indoor or outdoor use. Compact design, quiet, safe and long lasting. High efficient-save on operating cost. Completely Non-corrosive.

Model HL-450
Watt 7W
Hmax 85cm(2.79Ft)
Flow rate 450L/H(118.9G/H)
Flow control Yes
Outlet connection 8mm, 13mm
Size 44X58X51 mm
Approved GS, CE,  SAA
Operateing Voltage 120V, 220-240V

Professionals for a variety of handicrafts, a rockery, fountain garden dedicated, aquarium tank, water fountains and other decorative works.

Usage for 12v submersible pumps water pumps

1. Fountain
2. Aquarium
3. Garden/Farm irrigation
4 Aquarium Small fish pond
5. Water supply for remote ares etc all water feature system
6. Koi pond and all other water features due to the advanced technology used in our pump

Our Pump Feature for 12v submersible pumps water pumps
1. Perfect for indoor or outdoor use.
2. Compact design, quiet, safe and long lasting.
3. High efficient-save on operating cost, and energy saving up to 50% than before
4. Completely non-corrosive
5. It has good waterproof, high dielectric strength
6. Pumps are suitable for fresh & saltwater environments

SAFETY INSTRUCTIONS
Holinpump pumps are carefully inspected and tested to insure both safety and operating performance; However, failure to follow the instructions and warnings may result in pump damage and/or serious injury.

Warning
1, Risk of electric shock is certain that it is connected only to properly grounding-type receptacle.
2, Do not connect to any voltage other than that shown on the pump.
3, Do not pump flammable liquids
4, To reduce the risk of electrical shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.
5, Do not use with water above 35C (95F).
6, Operate pump completely submerged for proper cooling.
7, Not for swimming pool.

Clearing
1, To clean the pump, remove the back cover and the impeller.
2, Use a small brush or stream of water to remove any debris
3, IF THE PUMP FAILS TO OPERATE, CHECK THE FOLLOWING:
4, Check the circuit breaker and try another outlet to ensure the pump is getting electrical power.
5, Check the pump discharge and tubing for kinks and obstructions. Algae build up can be flushed out with a garden hose.
6, Check the inlet to ensure it is not clogged with debris.
7, Remove the pump inlet to access the impeller area. Turn the rotor to ensure it is not broken or jammed.
8, Monthly maintenance will add to your pump's life
9, We guarantee our products for a period of 12 months