Swipe or use the arrows to view product images.
25 Years Fluoroplastics Factory PVDF Panel Chemical Anticorrosive PVDF Sheet 30mm
| Price | $35.00 |
|---|---|
| Min Order | 10 kg |
| Availability | In Stock |
| Shipping From | Hunan, China |
| Popularity | 537 people viewed |
Material:
PVDF
Water Absorption:
＜0.01%
Contraction Percentage:
＜0.4%
Tensile Strength:
41~50MPa
Density:
1.76-1.78g/cm3
Elongation at Break:
300-450%
Temperature Range:
-40 to 150 Celcius Degree
Trademark:
Hongda
Transport Package:
Plywood Case
Specification:
Diameter 50-300mm, Length200mm
Origin:
Hunan China
HS Code:
3904690000
Product Description
25 Years fluoroplastics Factory PVDF Panel chemical anticorrosive PVDF sheet 30mm
25 Years fluoroplastics Factory PVDF Panel chemical anticorrosive PVDF sheet 30mm
PVDF (PolyVinylidene Fluoride) is a specialty plastic material in the fluoropolymer family. Its tensile strength is two times higher than PTFE, the compressive strength six times higher than PTFE, and the abrasion resistance similar to nylon. PVDF can be injected, molded to sheet, rod, pipe and is widely applied in the fields of photovoltaic, semiconductor, aviation and aerospace, electric plating, chemical anti-corrosion lining, tube, pump, valve, gasket, impeller and electrical wire& cable protection.
Features:
Appearance: Smooth surface, uniform texture, white color
1. High mechanical strength & rigidity
2. Good toughness
3. Good sliding and abrasion resistance
4. Self-extinguishing
5. UV resistant
6. Corrosion resistant
7. Good aging resistant and electrical insulation
Typical application:
1. Photovoltaic
2. Semiconductor
3. Electrical plating, photovoltaic
4. Chemical corrosion resistant lining
5. Chemical storage and handling, such as tube, pump
6. Electrical wire and wire protection
Technical index:
Company introduction:
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry,semiconductor, gas&oil, pump&valve, water treatment...
25 Years fluoroplastics Factory PVDF Panel chemical anticorrosive PVDF sheet 30mm
PVDF (PolyVinylidene Fluoride) is a specialty plastic material in the fluoropolymer family. Its tensile strength is two times higher than PTFE, the compressive strength six times higher than PTFE, and the abrasion resistance similar to nylon. PVDF can be injected, molded to sheet, rod, pipe and is widely applied in the fields of photovoltaic, semiconductor, aviation and aerospace, electric plating, chemical anti-corrosion lining, tube, pump, valve, gasket, impeller and electrical wire& cable protection.
Features:
Appearance: Smooth surface, uniform texture, white color
1. High mechanical strength & rigidity
2. Good toughness
3. Good sliding and abrasion resistance
4. Self-extinguishing
5. UV resistant
6. Corrosion resistant
7. Good aging resistant and electrical insulation
Typical application:
1. Photovoltaic
2. Semiconductor
3. Electrical plating, photovoltaic
4. Chemical corrosion resistant lining
5. Chemical storage and handling, such as tube, pump
6. Electrical wire and wire protection
Technical index:
| Item | Unit | Test method/condition | Index |
| Density | g/cm3 | ASTM D792 | 1.76-7.18 |
| Tensile strength | MPa | ASTM D638/23Celcius degree | 39-59 |
| Elongation at break | % | ASTM D638/23 Celcius degree | 300-450 |
| Hardness | shore | Durometer | D75-85 |
| Coefficient of linear expansion | 1/Celcius degree | ASTM D699/23-60 Celcius degree | 4.2×10 -5 |
Company introduction:
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry,semiconductor, gas&oil, pump&valve, water treatment...
- Similar Products
$3.00
500 Pieces (MOQ)
PVC Foam Sheet/PVC Free Foam Board for Add
SHANDONG YINGCHUANG PLASTIC CO., LTD.
$240.00
28 Square Meters (MOQ)
Odorless PE Foam for Toys, Medical, Healthy Product
SHANDONG YIHE PLASTIC CO., LTD.