Swipe or use the arrows to view product images.
25kv 630A Type Two-Position Oil Immersed Loadbreak Switch
| Price | $150.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 429 people viewed |
Model NO.:
ABF3I-25/630A
Application:
Power
Phase:
Three
Core:
Shell-type Transformer
Cooling Method:
Oil-immersed Type Transformer
Winding Type:
High Voltage
Certification:
IEC 62271-103-2011
Usage:
Power Transformer
Frequency Characteristics:
High Frequency
Shape of Core:
High Voltage
Brand:
Anhuang
Trademark:
OEM&ODM
Transport Package:
Packing in Carton
Specification:
ABF3I-25/630A Type Two-Position Oil Immersed Load
Origin:
China
HS Code:
8504901900
Product Description
25kV 630A Type Two-Position Oil Immersed Load Switch
With the transformer oil as insulation and arc extinction medium and energy storing spring operating mechanism, this two-position oil immersed load switch applies to the combined transformer with 50Hz frequency and 25kV rated voltage, it is capable to turn on and off the load current. Equipped with ON and OFF two positions, the clockwise turn is "ON", while anticlockwise is "OFF", the rotation angle should be controlled within 90°. In addition, it can be suitable for end power distribution system or ring-network power distribution system if equipped extra configurations.
Main technical parameters
Reservation installation size for transformer housing
Load switch installation
Before installation, please check whether the switching motion is flexible and accurate carefully, only after confirmed to be under good condition, the installation can be implemented, in addition, the load switch must be dried under 65±5ºCcondition by 24h.
5) After installation and connection, it is suggested to carry out "open" and "close" operation to check if the switch can be moved flexibly and if the position indication is correct, if any abnormal, please check the installation of switch and the connection of busbar according to article 2 and 4.
Points for attention
1) This load switch can be used to open or close rated current only, while the application for closing and opening the failure current. If over rated current, forbidden to operate switch.
2) Only the special insulated operating arm can be used to operate this load switch to ensure personal safety.
Connection Diagram
- Similar Products