3.5W Hydro Generator Portable Water Charger Hydro Water Flow Generator Piped Water Generator

Product Features

1.unique hydroelectric separation technology

unique double magnetic coupling clutch 
the size is only 4/5 of ordinary micro-hydro but the output power is 2 to 3 times

2.sophisticated structure arrangement
inlet, outlet pipe are available to match a straight line or L-type right angle mounting
efficient long-life waterway design
ultra low flow loss
ultra low water pressure (0.5KG) start

3 After the isolation of the diode this product can supplly power directly to the rechargeable battery below 3000MAH or supply power to 5F farad capacitor .It is the best best partner for smart faucet and sensor faucet

4 this product has been in the application of a large area for many years and has been improved in many aspects

Technical Specification

1.Pressure: ≤1.75 MPa
2.Running water pressure: 0.08 to 0.45 MP
3.Running water temperature: 0 ~ 80degrees
4.Ambient temperature: -25 ~ 110degrees
5.Flow range: 1.5 ~ 20 l/min (pressure: 0.05-0.2mpa)
6.Output current: 128~260 MA/0.1 K load
7.Output voltage: 3.5 + 0.2V (flow: 2 l/min)
8.Maximum output: 4.5 + 0.2V (flow: 10 l/min)
9.Starting flow rate: 1 l/min (1±0.2V)
10.Traffic loss: 3.6%(0.25 MP )
11.Size: 85.4×42.5×81.4 mm

Shell material: Nylon glass fiber, polyformaldehyde
Inlet and outlet diameter: 1/2 inches pipe(about 21.3mm)
Inlet and outlet angle: 90 degrees, 180 degrees, 270 degrees,these can be adjusted
Installation: according to the direction of the arrowhead, standard home water pipe
Inside diameter: 13mm
Outside diameter: 20mm

Product Photos