3-7.5kw 120-250bar Multi-Functional Car Washer Factory High Pressure Washer

1. The split design of the copper block of the pump head has stronger pressure bearing capacity and is more convenient for later maintenance;
2. The pressure gauge is located in front of the whole machine, making it easy to observe the pressure at any time and adjust the pressure according to user needs;
3. The oil mirror is located on the side of the pump head, making it easy to check the oil level at any time;
4. The design space of the box is enlarged, the internal pressure is reduced, and the oil temperature is lowered;
5. The reciprocating position of the plunger adopts composite cloth water seal, which has better sealing effect and longer life;
6. The high-pressure pipe uses 8*10 steel wire pipe. The Ø8 diameter inner hole has small water flow resistance. There are steel wires sandwiched inside the high-pressure pipe, which has higher high-pressure resistance and longer service life;
7. The connection position of the high-pressure water gun high-pressure pipe is equipped with a 360-degree rotating joint, which solves the problem of pipe winding during actual use and makes it more convenient to use; (2.2/2.6/3KW)
8. Each machine is equipped with nozzles with four different water angles: 0 degrees, 15 degrees, 25 degrees, and 40 degrees, allowing users to replace the nozzles at any time according to different requirements;
9. When designing the machine shape considering the actual situation of the user, multiple machines can be superimposed (up to four) to save space for the user;
10. Three-phase with low voltage protection, the protection switch will give an alarm when the voltage is lower than the set minimum voltage (350v);