Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

30g/H Flow Control Chlorine Dioxide Generator for Water Treatment

Price $6900.00
Min Order 1 Piece
Availability In Stock
Shipping From Jiangsu, China
Popularity 376 people viewed
Model NO.:
CPF-30D1X
After-sales Service:
Lifetime Paid Service After The Warranty Period
Warranty:
Paid Service for Life
Certification:
ISO9001, CE
Application:
Industry
Voltage:
220V
Disinfection Method:
Chlorine Dioxide
Control Mode:
Manual / Flow Auto-Control
Raw Chemical:
Naclo2, HCl
Reactor Material:
Titanium Alloy
Shell Material:
PVC
Trademark:
Waterman
Transport Package:
Plywood Box
Specification:
30 grams per hour
Origin:
Made in China
HS Code:
8419200000
Product Description
Product Description



Place of Origin: Jiangsu, China (Mainland)
Model: CPF-30D1X
Capacity: 30 grams per hour
Certification: ISO9001, CE Marked
EINECS No. 233-162-8
CAS NO. 10049-04-4
Control Mode: Manual / linkage / Flow auto-control
Installation Method: Wall-mounted or vertical
Power Supply: 220V/50Hz

 

Detailed Photos

 

Product Parameters

Main parameters:1. Operating voltage: AC220V plus or minus 10%2. Working temperature: -5 ~ 50 degrees Celsius3. Relative humidity: 80%4. Maximum pressure of water-pipe-line: <0.7Mpa5. There should be no strong electromagnetic field interference around the equipment.6. Function: Manual / Linkage / Flow auto-control                     Low liquid level alarm function                    Timing start / stop function
                    Alarm remote transfer


5 NaClO2 + 4HCl = 4ClO2 + 5NaCl + 2H2O
NaClO2: industrial sodium chlorite (purity≥78% ) or liquid
Activator: industrial first grade compound hydrochloric acid (purity≥31%) or other weak acid or strong acid

Two raw chemicals of NaClO2 and HCl are to be inhaled into the reactor proportionally by two metering pumps, in which produce quantitative high-purity ClO2 solution, and then to be dosed directly in the water tank or pressured water pipe together with the dilution water.

The highest outlet pressure of ClO2 solution is 0.40Mpa. Raw chemicals conversion rate is higher than 90%. The dosage of ClO2 can be adjusted manually or automatically by receiving 4-20mA signal sent by flow rate sensor.

 
  • Similar Products
Full Page Contact Supplier