Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Industrial Equipment & Components > Valve > Solenoid Valve
Swipe or use the arrows to view product images.

3r Series 3r210-08 Single Head Control Pneumatic Hand Valve

Price $1.75
Min Order 10 Pieces
Availability In Stock
Shipping From Zhejiang, China
Popularity 461 people viewed
Send Inquiry View Full Page
Model NO.:
3R310-10
Media:
Gas
Temperature:
0-60
Actuator:
Pneumatic
Connection Form:
Thread
Type:
Distribution of Direct Acting
Material:
Aluminum
Pressure:
Low Pressure
Valve Structure:
Direct-Acting Piston Structure
Power Supply:
AC Solenoid Valve
Usage:
Flow Control
Standard:
DIN
Application:
Industrial Usage, Household Usage
Transport Package:
Box Package
Origin:
China
HS Code:
8481100090
Product Description
Model NumberPort sizeWorking PressureBody MaterialConnect typeApplication type
4V110-06 DC24V1/80-0.8mpaaluminum alloyThreadpneumatic control
4V120-06 DC24V1/80-0.8mpaaluminum alloyThreadpneumatic control
4V130-06 DC24V1/80-0.8mpaaluminum alloyThreadpneumatic control
4V210-08 DC24V1/40-0.8mpaaluminum alloyThreadpneumatic control
4V220-08 DC24V1/40-0.8mpaaluminum alloyThreadpneumatic control
4V230-08 DC24V1/40-0.8mpaaluminum alloyThreadpneumatic control
4V310-10 DC24V3/80-0.8mpaaluminum alloyThreadpneumatic control
4V320-10 DC24V3/80-0.8mpaaluminum alloyThreadpneumatic control
4V330-10 DC24V3/80-0.8mpaaluminum alloyThreadpneumatic control
4V410-15 DC24V1/20-0.8mpaaluminum alloyThreadpneumatic control
4V420-15 DC24V1/20-0.8mpaaluminum alloyThreadpneumatic control
4V430-15 DC24V1/20-0.8mpaaluminum alloyThreadpneumatic control
4M210-08 DC24V1/40-0.8mpaaluminum alloyThreadpneumatic control
4M310-10 DC24V3/80-0.8mpaaluminum alloyThreadpneumatic control

Tips for choosing a quick coupler

01: How to choose a quick coupler:
1. The connecting thread and pipe part are not allowed to pull or rotate, otherwise the thread or pipe connection will fall off. In the case of pulling or turning, a rotary joint should be used.
2. The bending of the pipe should be greater than the minimum bending radius, otherwise the pipe is easy to break.
3. Inflammable, explosive or toxic gases such as coal gas, gas fuel and refrigerant cannot be transported in the pipe
4. General industrial water can be used.
5. The impulse pressure should be prepared, not exceeding the maximum operating pressure, otherwise it is easy to damage.

02: How to install the quick connector?
1. Before installation, confirm the correct model and size, and confirm that the product has no cracks or scars.
2. The length of the connecting pipe will change considering the pressure change, so the length should be left margin.
3. The joint box tube is not allowed to be twisted or stretched, and bear a negative torque, so as to avoid the joint damage, the tube damage, cracking or falling off.
4. When piping and fittings are screwed in, do not mix the chips of the piping thread and the small pieces of sealing material into the pipe. When using the sealing tape, leave the thread head about 2 pitches free and not wrap the sealing tape.

03: In which environments are quick connectors used?
1. Do not use quick connectors in electrostatic sensitive occasions, which will cause poor system actions and malfunctions.
2. Do not use the quick connector in the occasions where sparks occur. Sparks may cause fire hazards.
3. Do not use it in an environment where cutting oil, lubricating oil and coolant are in direct contact with liquids.


Contact us

Vivi Lian
 
  • Similar Products
Full Page Contact Supplier
↑