Swipe or use the arrows to view product images.
4303 Series Steel, Mod 0.8 Pinion Gear (8mm REX Bore, 20/24/30/36/40 Tooth)
| Price | $3.39 |
|---|---|
| Min Order | 1 Bag |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 482 people viewed |
Model NO.:
4303-4008-0020
After-sales Service:
1 Year
Warranty:
1 Year
Condition:
New
Certification:
ISO9001
Customized:
Non-Customized
Material:
Aluminum
Application:
Building a Robot
Tooth Count:
45/46/48/5052/54/56/58/60/62/64/66/68/70/72 Tooth
Weight:
10g
Trademark:
thefirsttool
Transport Package:
Carton
Specification:
Gear Pitch MOD 0.8
Origin:
Guangdong
Product Description
All products in our store Ex-factory price not free shipping
| Item No | name | Specification |
| 4303-4008-0020 | 4303 Series Steel, MOD 0.8 Pinion Gear (8mm REX Bore, 20 Tooth) | The pinion gears here are able to mount on a shaft without the need for a hub. While pinion gears are most commonly associated with being the first gear in a geartrain, they certainly don't have to be. If your build is going to take a beating, consider 8mm REX. These gears are constructed of hardened steel and mount with two set screws for excellent hold on 8mm REX shafting.This 20 tooth 8mm REX bore pinion gear is ready to rip! The bore perfectly matches our 8mm REX shafting to create a positive drive. While little work is left for the set screws, we put two of them in for good measure. This particular gear is most commonly mated to a 100 tooth hub gear in order to create a 5:1 ratio however if your build provides the freedom to adjust the spacing between your gears, it's able to mesh to any MOD 0.8 gear that suits your fancy. Weight 14g Material Steel Finish Black Zinc-Plated Tooth Count 20 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| Item No | name | Specification |
| 4303-4008-0024 | 4303 Series Steel, MOD 0.8 Pinion Gear (8mm REX Bore, 24 Tooth) | The pinion gears here are able to mount on a shaft without the need for a hub. While pinion gears are most commonly associated with being the first gear in a geartrain, they certainly don't have to be. If your build is going to take a beating, consider 8mm REX. These gears are constructed of hardened steel and mount with two set screws for excellent hold on 8mm REX shafting.This 24 tooth 8mm REX bore pinion gear is ready to rip! The bore perfectly matches our 8mm REX shafting to create a positive drive. While little work is left for the set screws, we put two of them in for good measure. This particular gear is most commonly mated to a 96 tooth hub gear to create a 4:1 ratio. However, if your build provides the freedom to adjust the spacing between your gears, it's able to mesh to any MOD 0.8 gear that suits your fancy. Notice the counterbore on the top side of the gear - this allows you to run right up against an 8mm bearing without the use of a shim! Weight 18g Material Steel Finish Black Zinc-Plated Tooth Count 24 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| Item No | name | Specification |
| 4303-4008-0030 | 4303 Series Steel, MOD 0.8 Pinion Gear (8mm REX Bore, 30 Tooth) | The pinion gears here are able to mount on a shaft without the need for a hub. While pinion gears are most commonly associated with being the first gear in a geartrain, they certainly don't have to be. If your build is going to take a beating, consider 8mm REX. These gears are constructed of hardened steel and mount with two set screws for excellent hold on 8mm REX shafting.This 30 tooth 8mm REX bore pinion gear is ready to rip! The bore perfectly matches our 8mm REX shafting to create a positive drive. While little work is left for the set screws, we put two of them in for good measure. This particular gear is able to be meshed with a 90 tooth hub gear spaced 48mm away for a 3:1 ratio, or, it can mate to another 30 tooth gear to create a very compact 1:1 ratio only 24mm apart! If your build provides the freedom to adjust the spacing between your gears, it's able to mesh to any MOD 0.8 gear that suits your fancy. Notice the counterbore on the top side of the gear - this allows you to run right up against an 8mm bearing without the use of a shim! Weight 23g Material Steel Finish Black Zinc-Plated Tooth Count 30 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| Item No | name | Specification |
| 4303-4008-0036 | 4303 Series Steel, MOD 0.8 Pinion Gear (8mm REX Bore, 36 Tooth) | The pinion gears here are able to mount on a shaft without the need for a hub. While pinion gears are most commonly associated with being the first gear in a geartrain, they certainly don't have to be. If your build is going to take a beating, consider 8mm REX. These gears are constructed of hardened steel and mount with two set screws for excellent hold on 8mm REX shafting.This 36 tooth 8mm REX bore pinion gear is ready to rip! The bore perfectly matches our 8mm REX shafting to create a positive drive. While little work is left for the set-screws, we put two of them in for good measure. This particular gear is able to be meshed with an 84 tooth hub gear spaced 48mm away for a 2.33:1 ratio, or, it can mate to a 24 tooth gear to create a very compact 1.5:1 ratio only 24mm apart! If your build provides the freedom to adjust the spacing between your gears, it's able to mesh to any MOD 0.8 gear that suits your fancy. Notice the counterbore on the top side of the gear - this allows you to run right up against an 8mm bearing without the use of a shim! Weight 27g Material Steel Finish Black Zinc-Plated Tooth Count 36 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| Item No | name | Specification |
| 4303-4008-0040 | 4303 Series Steel, MOD 0.8 Pinion Gear (8mm REX Bore, 40 Tooth) | The pinion gears here are able to mount on a shaft without the need for a hub. While pinion gears are most commonly associated with being the first gear in a geartrain, they certainly don't have to be. If your build is going to take a beating, consider 8mm REX. These gears are constructed of hardened steel and mount with two set screws for excellent hold on 8mm REX shafting.This 40 tooth 8mm REX bore pinion gear is ready to rip! The bore perfectly matches our 8mm REX shafting to create a positive drive. While little work is left for the set screws, we put two of them in for good measure. This particular gear is able to be meshed with a 80 tooth hub gear spaced 48mm away for a 2:1 ratio, or, it can mate to a 20 tooth gear to create a very compact 2:1 ratio only 24mm apart! If your build provides the freedom to adjust the spacing between your gears, it's able to mesh to any MOD 0.8 gear that suits your fancy. Notice the counterbore on the top side of the gear - this allows you to run right up against an 8mm bearing without the use of a shim! Weight 31g Material Steel Finish Black Zinc-Plated Tooth Count 40 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
- Similar Products
Negotiable
1 Piece (MOQ)
Precision Big Size Fast Machining Custom-Made Machined Parts
Anhui Techwork Industrial Co., Ltd.
$0.80
10 Pieces (MOQ)
Durable Solid Carbide End Mills for Milling
Zhuzhou Zhirong Advanced Materials Co., Ltd.