48V/100ah Lithium Ion Batteries Energy Storage Management System

P5K is a new generation of household energy storage system with two output specifications of 220V and 110V, which

can meet the diversified needs of global users. The P5K energy storage system adopts a modular design, including power

modules and battery expansion modules, so it can be easily combined into a system of any capacity required by the user.

The lithium iron phosphate batteries with high performance and long service life are used in the energy storage module.

Meanwhile, the modular structure design is adopted. Each energy storage module is internally integrated with the intelligent

BMS system, which can be easily expanded and can be combined into 75Kwh battery pack at most.

The typical topological diagram for application of the system is as follows:

P5K series energy storage system supports the capacity expansion with up to fifteen energy storage modules.

The voltage of a single battery is 51.2V and the capacity is 100Ah.

The communication BMS can communicate with the upper computer through RS232 interface, so that various

information of the battery can be monitored through the upper computer, including battery voltage, current,

temperature, status and battery production information. The default baud rate is 9600bps.

CAN communication

CAN communication, the default communication rate is 250K.

RS485 communication

With dual RS485 interface, you can view the pack information. The default baud rate is 9600bps. If it is necessary to

communicate with the monitoring equipment through RS485, the monitoring equipment, as the host, polls the data

according to the address.