50kw Single Phase Electric Energy Saving Device Intelligent Power Saver

50KW Single Phase Power Saver Is Easy to use,Electric Energy Saving Device Weight is 600g,Intelligent Power Saver Can save power,50KW Single Phase Power Saver has Stabilizes the voltage supply,Electric Energy Saving Device can Prevents electrical overheating,Intelligent Power Saver

Product Features:
1. Saving 20%-50% of electrical consumption. 
2. Stabilizes the voltage supply. 
3. Improves efficiency of appliances. 
4. Prevents electrical overheating. 
5. Prolongs the life of electrical devices. 
6. Products with convex wave resistance, protection of electrical appliances. 
7. Indoor plug and play, had no effect on electrical circuit.Both men and women, old and young can operate. 
8. Installation in 24 hours, can control the current and achieve energy saving effect. 
9. Just plug the saver into the wall socket closest to the meter,one signal phase household require one Power Saver. 
10. Suiltable for air conditioner,heating device, washing machine,TV,Refriderator,lamp and other home appliances. 
11. Applicable for family, bar, hotel, Internet cafes, company, shop, small factory.etc.
 
Product Specification: 
Operating principle:
1. The Power Saver use a state of the electrical technology to actively monitor and improve the power factor of your household or office appliances.
2. In addition, the intelligent technology optimizes the voltage and current demands thus reducing the active power/ KwH demands and achieves up to 35% savings on your electricity bill. It reduces waveform distortions.
3. It also acts as a voltage stabilizer by storing emery for up to 10 seconds and therefore suppliers the load with constant voltage during momentary power surges. As a result, this power saver prolongs lifespan of the electrical appliances
4. Super intelligent digital energy saving equipment It uses a state of the art electrical technology to actively monitor and improve the power factor of your household / office appliances
5. The technology optimizes the voltage and current demands to reduce the active power demands and achieves unto 35% savings on your electricity bill
 
Warm Tips:
Please make sure that it is installed as close as possible to the point of entry of your electricity supply in order to detect all loads before the meter and adjust the power factor accordingly.