Swipe or use the arrows to view product images.
6j13 Manganin shunt Copper and Manganin welding strip
| Price | $18.00 |
|---|---|
| Min Order | 50 kg |
| Availability | In Stock |
| Shipping From | Shanghai, China |
| Popularity | 539 people viewed |
Model NO.:
6j13
Min Thickness:
0.01mm
Resisivity:
0.47ppm
Elongation Rate:
15(Min)
Tensile Strength(Hard):
635MPa(Min)
Trademark:
Taknkii
Transport Package:
in Roll, in Woodencase Outside
Origin:
China
Product Description
Manganin Strip/Sheet/Foil /Cu86nn12ni2 Strip
Product Description
Shunt Manganin widely used for Shunt resistor with the highest requirements, shunt manganin has been used in precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers and resistance standards.
Chemical Content, %
Ni | Mn | Fe | Si | Cu | Other | ROHS Directive | |||
Cd | Pb | Hg | Cr | ||||||
2~5 | 11~13 | <0.5 | micro | Bal | - | ND | ND | ND | ND |
Mechanical Properties
Max Continuous Service Temp | 0-100ºC |
Resisivity at 20ºC | 0.44±0.04ohm mm2/m |
Density | 8.4 g/cm3 |
Thermal Conductivity | 40 KJ/m·h·ºC |
Temp Coefficient of Resistance at 20 ºC | 0~40α×10-6/ºC |
Melting Point | 1450ºC |
Tensile Strength(Hard) | 585 Mpa(min) |
Tensile Strength,N/mm2 Annealed,Soft | 390-535 |
Elongation | 6~15% |
EMF vs Cu, μV/ºC (0~100ºC) | 2(max) |
Micrographic Structure | austenite |
Magnetic Property | non |
Hardness | 200-260HB |
Micrographic Structure | Ferrite |
Magnetic Property | Magnetic |
Resistance Alloy- Shunt Manganin Sizes / Temper Capabilities
- Condition: Bright, Annealed, Soft
- Wire &Ribbon diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
- Rod, Bar diameter 1mm-30mm
- Strip: Thickness 0.01mm-7mm, Width 1mm-280mm
- Also enameled condition is available
- Similar Products
$200.00
50 grams (MOQ)
Gold Grain, Au Evaporation Coating Particles, Gold Grain/Ingot Manufacturer
Rheniumet Ltd.