95% Alumina Mch Resistor Ignitor for Biomass Boiler

Specifications

1.Ignitorr for biomass boiler lighter 
2. Competitive price 
3.Fast heating up 
4.Long life 
5.Meet Rohs 

Characteristic

1.High temperature-resistance ceramic heating element which can reach a permanent working temperature

   above 750°C

2.Energy saving, super fast heating-up

3.Air can through and around inside and outside of the heater.

Heat can be transfered from both inside and ouside of the heating element.

4.Electrically oxidation and corrosion-resistant

5.High load-bearing capacity(thermal shock resistance, cycles)

5.Customization the igniters according to customers' specific requirement.

Application

One special application area for our high temperature ceramic igniters is in heating systems that use solid fuels such as wood pellets as energy source. The challenge here is to ignite the biomass in a very short time while retaining very low emission values. This can be perfectly achieved by our hot surface ceramic igniters.

Ceramic hot surface igniters for pellet boilers need only approx. 1/10 of the energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 Watt. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is  extremely short. This also means minimal emissions

Mass customization is available.

Mass customization is available.

Packaging & Shipping