AB31 AB41 2 Port Direct Operated Normally Closed Brass Solenoid Valve 1/8′′ 1/4′′ 3/8′′ 1/2′′ 12V 24V 110V 220V

1. Working Medium: Water, Air, Gas, Oil, Steam, Vacuum, etc
2. Working Pressure Range: 0 to 50 bar (See the parameter table below for details)
3. Medium Temperature Range: NBR (-5 to +85ºC), EPDM (-5 to +150ºC), VITON (-10 to +180ºC)
4. Port Size: 1/8'', 1/4'', 3/8'', 1/2''
5. Orifice Size: 1.5mm, 2mm, 3mm, 3.5mm, 4mm, 5mm, 7mm, 10mm
6. Body Material: Brass
7. Seal Material: NBR, EPDM, VITON
8. Operation: Direct Acting
9. Function: 2 Way Normally Closed, 2 Way Normally Open
10. Voltage: 12VDC, 24VDC, 24VAC, 110VAC, 220VAC

Question 1: What is a solenoid valve used for?
Answer 1: A solenoid valve is used to open, close, mix, or divert media in an application. They are used in a wide variety of applications.

Question 2: How can you tell if your solenoid is bad?
Answer 2: If the solenoid valve fails to open or close, is partially open, makes a humming noise or has a burned-out coil, you need to troubleshoot the valve solenoids.

Question 3: How do I choose a solenoid valve?
Answer 3: When choosing a solenoid valve, it is important to know your media. Depending upon the media and flow requirement, choose the material, orifice size, temperature, pressure, voltage, response time and certification required for your application.