AR/ARG Fiberglass Premix & Water Dispersed Chopped Strand

Our alkali resistant fiberglass water dispersed chopped strand applied with water-dispersed size, the strand will disperse well to filaments in water in10 seconds, and also disperse fast, appliance amount less, enlarge strength.

It is typically used in a small amount to prevent cracking and to improve the performance of ready mix concrete, gypsum or other special mortar mixes. It can be used for surface crack - proof of GRC products.

Properties:

Disperse fast, low dosages, harmless.

Package and Storage

Package:

20kgs/kraft bag, 50 bags/pallet, 20 pallets/20'FCL(on 2 levels), total net weight for approximately 18 tons.

Other packing methods are available, according to customers' requirements.

Storage:

GRC Water Dispersed Chopped Strand should be stored dry in their original package, the best conditions being at a temperature of between 15 and 35, and at a relative humidity of between 35 and 65%. If the product is stored at low temperature (below 15), it is advisable to condition in the workshop for 24 hours before use to prevent condensation.