ASTM D189 SYD-268 Carbon Residue Tester

SYD-268
Carbon Residue Tester(Conradson Method)

Summary
  The instrument is designed and made as per national standard of People's Republic of China ASTM D189 and GB/T268 Standard Test Method for Carbon Residue of Petroleum Products by Conradson Method. It is used to determine the amount of carbon residue of petroleum products after evaporation and pyrolysis, so as to check coke forming property of petroleum products.It can also meet requirements of ASTM D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products.

 
I. Main technical features
1. The design can totally meet requirements of standard GB/T 268.
2. Simple design. Accessories complete. The test can be done as loon as equip civil gas.
 
II. Main technical specifications
1. Porcelain crucible: About 30ml.
2. Inner iron crucible: About (75±5)ml.
3. Outer iron crucible: About(190±10)ml with cover.
4. Supporter: Height: (250±10)mm  Bore diameter: Ф(130±5)mm
5. Flame shield: Diameter of upper port:Ф(90±2)mm
                           Diameter of lower port:Ф(82±2)mm
6. Round iron cover:  The height of underpart is (50~53)mm.
                                   The height of cone  in the middle is (25±2)mm.
                                  There is a piece of iron wire as the fire bridge on the top.
                                  The height is (50±3)mm.It is regarded as the indicator of max height.
7. Blowtorch: It adopts gas torch .
8. Dimension: Ф130mm×400mm

III,SYD-268 Carbon Residue TesterConradson Method)Accessories and Documents List
IV,SYD-268 Carbon Residue TesterConradson Method)'s Reagent and Auxiliary Equipments
Notes:
1,The reagent and equipments for installing the instrument are supplied by end-users themselves.
2,The usage,management and saving of poisonous and harmful reagent,pls operate according to the relative principle.
3,PLS read the operation manual and industry standard before using the instrument.