Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Electrical & Electronics > Sensor > Gas Sensor
Swipe or use the arrows to view product images.

Acetylene Electrochemical Sensor

Price $68.70
Min Order 1 Piece
Availability In Stock
Shipping From Hubei, China
Popularity 466 people viewed
Send Inquiry View Full Page
Model NO.:
4C2H2-25000
Type:
Infrared Gas Sensor
Conductivity Type:
Surface Type
Output Signal Type:
Analog Type
Production Process:
Integration
Material:
Plastic
IP Rating:
IP65
Sensitivity:
Medium
Certification:
RoHS
Customized:
Customized
Trademark:
AERI
Transport Package:
Packing Bottle
Specification:
30ml
Origin:
China
HS Code:
4204960212
Product Description
4C2H2-25000 Acetylene Electrochemical Sensor 
(P/N: SEC-4C2H2-25000)
 
 
Technical Specifications
MEASUREMENT 
Operating Principle3-electrode electrochemical
Detection Range0~25000 ppm
Sensitivity1 ± 0.5 nA/ppm
Response Time (T90)≤ 30 s
Repeatability<±2% signal
LinearityLinear
MEASUREMENT <2% signal/month

ELECTRICAL
Resolution<100 ppm
Recommended Load5~35 
Bias Voltage300 mV

ENVIRONMENTAL
Operating Temp. Range-20°C ~ 50°C
Operating Humidity Range15% RH ~ 90% RH non- condensing
Operating Pressure Range800 ~ 1200 mbar

LIFETIME
Recommended Storage Temp.0°C to +20°C in sealed container
Expected Operating Life24 months in air
Storage Life6 months in original packaging
Standard Warranty12 months from date of despatch

Product Dimensions

All dimensions in millimeters (± 0.1mm)
 



Cross-sensitivity Data
GasConcentration(ppm)Output signal
(ppm 4C2H2 equivalent)
Methane10000
Carbon dioxide30000
Carbon monoxide20001200
Whilst the Gas Sensor are designed to be highly specific to the gas they are intended to measure, they will still respond to some degree to various gases. The table below is not exclusive and other gases not included in the table may still cause a sensor to react. The cross-sensitivity values quoted are based on tests conducted on a small number of sensors. They are intended to indicate sensor response to gases other than the target gas. Sensors may behave differently with changes in ambient conditions and any batch may show significant variation from the values quoted.
SAFETY NOTE:
Connection should be made via a PCB mounting socket. Soldering to pins will void the sensor's warranty.
It is important that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into instruments, and operation;
If the Gas Sensor is removed from application circuit, a jumper should be added on 'R' and 'S' pin.
As applications of use are outside our control, the information provided is given without legal responsibility. Customers should test under their own conditions, to ensure that the sensors are suitable for their own. The data is given for guidance only. It does not constitute a specification or an offer for sale.
  • Similar Products
Full Page Contact Supplier
↑