Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

All Purpose Heavy Duty No More Nails Glue Adhesive Cement Liquid Nail for Wood Furniture Plaster Bonding

Price $1.20
Min Order 1 Piece
Availability In Stock
Shipping From Guangdong, China
Popularity 400 people viewed
Model NO.:
281
CAS No.:
79/10/7
Formula:
C3h4o2
EINECS:
201-177-9
Bonding Function:
Liquid Nail, Structural Adhesive
Morphology:
Paste, Solvent
Application:
Automobile, Construction, Woodworking, Packing, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing, Lithium Battery Potting
Material:
Polyester, Acrylic
Classification:
Room Curing
Main Agent Composition:
Acrylic
Characteristic:
Liquid Nail, Waterproof
Promoter Composition:
Tackifier
Composition:
Organic Material
Color:
Clear, OEM
Products Name:
Construction Adhesive Liquid Nail Solvent Free
Trademark:
Kastar
Transport Package:
300ml Cartridge Packing, 24 PCS/Carton.
Specification:
300ML
Origin:
China
Product Description

NO MORE NAILS

Introduction:

Kastar nail-free adhesive is so high bonding strength that it can function as nails. Without drilling holes, it can bond timber, plasterboard, medium-density fireboard, stone, cement, tile, metal, plastic, and rubber.

Characteristics:

1. Super adhesion, high strength

2. Great flexible, not brittle

3. Wide in application

4. Unsinkable, fillable, and paintable

5. Weatherable, waterproof

6. Non-toxic, no odor and eco-friendly,, meeting the standards of GB18583

Uses:

1. The surfaces to be bonded should be clean, free from dust grease or oil.

2. Cut an opening in the mouth of the tube, matched with the attached plastic pipe. Then squeeze the adhesive out with a sealant gun.

Method 1 (applicable for light objects and the bonding part bearing weak force)

Coat one part to be bonded with several "zigzag" patterns at the intervals of 40 cm. Push the part with adhesive toward the other and then remove it so that there is an opening between them for the solvent to volatilize. Wait for 2-5 minutes and then compress the two parts against each other.

Method 2 (applicable for heavy objects)

Coat one part to be bonded with several "zigzag" patterns st the intervals of 40 cm. Clamp or screw the two parts together until the glue dries (in about 24 hours). Then remove the clam of the screw. The bonded parts can be adjusted if necessary in 20 minutes. The initial curing time is 24 hours and the adhesive will work and reaches its best effects in 48 hours.

Precautions:

1. Adequate local exhaust ventilation is required and the product must be kept off children.

2. In the event of its touch of skin or eyes, flush with freshwater or see a physician.

3. Store in dry, shaded, and ventilated condition away from the sources of heat and ignition.

4. In the event of mass use, make a pre-test to avoid the negative effect of mal-operation.

 

 

Can nail-free adhesive replace screws?

Kastar Nail-free adhesive can do what screws do. There is no need for hammers and it does not do any harms to the wall or any parts to be bonded. What' more, it is waterproof, corrosion-proof and heat/cold-proof.

 

 

Fixed quickly

A viscous force beyond imagination

Sci & Tech greening nature

High density

Smart helper on decoration

Shelf life: 18 months

Net content:320ml

ISO9001

ISO14001

ROHS

UKAS QUALITY

 

 
  • Similar Products
Full Page Contact Supplier