ANSELL EXTRA 87-950 CHEMICAL-RESISTANT GAUNTLET GLOVES

Made from 0.75mm-thick natural rubber latex that has been chlorinated for added resistance, the Ansell Extra 87-950 Chemical-Resistant Gauntlet Gloves provide reliable protection against many salts, detergents, ketones, alcohols, alkalies and fats. These gloves are textured on the outside and flocklined inside, and, as a result, promote exceptional grip and enhanced comfort for manual handling and precision tasks.

FEATURES AND BENEFITS OF THE ANSELL EXTRA GAUNTLETS

• Heavy-weight natural rubber latex gauntlets
• Chlorinated for better grip and increased chemical resistance
• Resistant to many ketones, salts, detergents, alcohols, alkalies and fats
• Cotton flocklining for better comfort and perspiration absorption
• Lozenge-textured surface for enhanced grip

RUBBER LATEX COMPOSITION

The 87-950 Gauntlet Gloves are made from 100% pure latex with no fillers, are chlorinated and are 50% thicker than standard flocklined gloves. As a result, they provide excellent resistance to many ketones, salts, detergents, alcohols, alkalies and fats.

TEXTURED FOR BETTER GRIP

The Ansell 87-950 Gauntlets have an embossed lozenge finish that enables good grip in both wet and dry conditions. This texturing increases safety during manual handling and improves control for precision tasks. By enhancing gripping ability, these gloves reduce the amount of force needed to perform tasks, and this helps to minimise hand fatigue.

APPLICATIONS FOR THE ANSELL EXTRA CHEMICAL-RESISTANT GLOVES

These gloves are ideal for use in the chemical and maintenance industries. Suitable applications include:

• Chemical processing
• Chemical preparation
• Heavy-duty handling
• Maintenance of plant and heavy equipment

TESTING OF THE EXTRA 87-950 GAUNTLET GLOVES

The Extra 87-950 Gauntlet Gloves meet the following specifications:

• European Directive 89/686/EEC
• EN 420:2003 + A1:2009
• EN 388:2003: X121
• EN 374-1:2003: AKL
• EN 374-5:2003: Protection against micro-organisms

The table below shows the test results of the 87-950 Chemical-Resistant Gloves according to EN 388:2003 Mechanical Risk specifications.

The Ansell 87-950 Gauntlets have been tested to EN 374-5:2003 and have been classified as protection against micro-organisms. These gloves have also been tested to EN 374-1:2003 for chemical resistance. The gloves achieved a breakthrough time of at least 30 minutes for the following chemicals under EN 374-1:2003:

SIZING OF THE ANSELL 87-950 GAUNTLET GLOVES

These gloves are available in a range of sizes, making them suitable for most users. Please consult the table below for details, then select the required size from the drop-down menu at the top of the page. The gloves have a length of 320mm and a thickness of 0.75mm.