Automatic Glass Washing and Drying Machine for Insulated Double Glazing Glass Processing

BXL2800 vertical glass washing and drying machine takes the structure of vertical inclination. Used for single Low-E glass, or laminating glass washing and drying. The control box is located on the front door of the drying zone, which simplifies the operation.




Feature

1. Automatic distinguish the coating side of Low-E glass, front 3 soft low-E brushes.
2. Unique air knife and silencer for washing machine.
3. The washing zone and water tank are made of stainless steel and corrosion-proof material. Water heating system available.
4. The conveyor rollers are made of rubber, resistant to acid and alkali.
5. Automatic adjustment of glass thickness from 3mm to 12mm.
6. Drive speed adjusted by inverter stepless, the glass runs stably at proper speed.
7. Three pairs of brushes, with high-pressure water spray nozzle.
8. In the drying zone, there is a pair of alloyed and corrosion-proof air knife, installed angularly, generate strong air flow to dry both sides of glass.
9. Three independent water circulating system: the first washing water system, the second washing water system and rinse water system.
10. To ensure the washing quality, the water conductivity should not exceed 40µs/cm.
11. 15KW blower with heating system.

Parameter





Mostly asked questions below:

1. What is your soonest lead time?
  A: 60 days for whole production line, 30 days for single machine.  Special requirement pls check with sales.

2. How do you arrange the shipment?
  A: All machines fit GP for sea freight saving. Seaworthy package, workshop container loading, safe arriving.

3. Guarantee ?
  A: One-year guarantee (wearing parts are out of this range). Life long service. DETEK will send engineers for service upon request onsite.

4. How we can install the machines?
  A: Installation included; however, customers need to pay our engineer's round way air tickets, local transportation and accommodation (hotel and            food).
      The installation should be finished within 15 days, and will be charged 60USD/engineer/day.

5. How about the after service?
  A: Spare parts within 72 hours.
      Experienced technical sales sort out most of your questions.
      Tens of service engineers ready for on-site service and instruction.