Automatic Mini Fire Extinguisher: Revolutionizing Home & Office Safety

Can be used to put out the following fires:

(1) Electrical fire: electical fire caused by leakage, short circuit, overload and connect excessive resistance to the wire;

(2) Solid surface fire: the surface fire on solid material in the place where stored combustible solid material;

(3) Liguid fire: liguid fire in places where diesel oi-35 dieselolis excuded, heawy oil transtormer oil animal and veeetable oil and otherflammable liguids are produced, used or stored;

(4) Gas fire: the gas fire that can cut off the air supply before extinguishing.

Installation precautions:

(1) S-type aerosol fire-extinguishing stickers of suitable type should be selected according to the installation conditions in diferent places;

(2) S-type aerosol fire-extinguishing sticker is pasted on the flat position above the easily ignited area through three m adhesive at the bottom.and it needs to be wiped clean before pasting;

(3) The installation of S-type aerosol fire-extinguishing stickers is strictly prohibited to be removed without authorization, and it is not allowed to move afterinstallation;

(4) S-type aerosol fire-extinguishing stickers should not be installed in the following positions:

A) near fire and goods stock place;

B) near aiinlet exhaust outlet, door, window and other openings;

C) easily drenched, watered and flooded;

D) evacuation passageway,

E) frequentyaffected by vibration,impact and corrosion.