Swipe or use the arrows to view product images.
Back Pressure Steam Turbine for Power Generation (T530)
| Price | $100000.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 393 people viewed |
Model NO.:
T530
After-sales Service:
Provide Installation and Commissioning Guidance.
Warranty:
One Year
Power:
300-1500kw
Generator Type:
Driving Pumps
Output Type:
300-1500kw
Certification:
CCC, ISO
Standard:
Nonstandard
Type:
Back Pressure
Inlet Steam Press:
2~6 MPa(a)
Inlet Steam Temperature:
≤435ºC
Rated Speed:
3000rpm
Weight:
3.1t
Trademark:
RENAO
Transport Package:
Wooden Box
Specification:
1900× 1450× 1540
Origin:
China
Product Description
The T530 steam turbine is a single - stage back - pressure steam turbine. It has a velocity - compounded stage impeller with an impeller pitch circle diameter of 800 millimeters. The rated speed of the main shaft is 3000 revolutions per minute, and the power range is 300 - 1500 kW. A gearbox can be installed according to user requirements to achieve speed change. The main feature of this model is to use superheated steam as the steam source to drive rotating machinery to do work, realizing the cascade utilization of energy to achieve the purpose of energy conservation and consumption reduction.
Overall dimension drawing
Cross-sectional drawing
1-Chassis
2-Elastic Bracket
3-Front Bearing Housing
4-Speed Sensor
5-Emergency Trip Device
6-Emergency Trip Device Linkage
7-Support Thrust Front Bearing
8-Thermal Resistor
9-Rotor
10-Steam Seal
11-Cylinder
12-Impeller Blade
13-Rear Bearing Housing
14-Rear Bearing
15-Coupling
2-Elastic Bracket
3-Front Bearing Housing
4-Speed Sensor
5-Emergency Trip Device
6-Emergency Trip Device Linkage
7-Support Thrust Front Bearing
8-Thermal Resistor
9-Rotor
10-Steam Seal
11-Cylinder
12-Impeller Blade
13-Rear Bearing Housing
14-Rear Bearing
15-Coupling
Optimized design
| Item | Unit | Data |
| Product Code | T530 | |
| Rated Speed (Gearbox Reduction) | r/min | 3000 |
| Number of Turbine Stages | 1 regulation stage | |
| Governor Type | PLC Regulation | |
| Overspeed Protection Method | Two-out-of-three electrical overspeed protection + mechanical overspeed protection | |
| Overspeed Protection Actuation Speed | Rated speed × (1.09 - 1.11) | |
| Overspeed Protection Response Time | s | <0.5 |
| Vibration Value at Rated Speed | mm | ≤0.03 |
| Vibration Value at Critical Speed | mm | ≤0.15 |
| Maximum Axial Displacement | mm | ±0.4 |
| Weight | t | 3.1 |
| Bearing Lubrication Type | Forced lubrication | |
| Bearing Alarm Temperature | ºC | 85 |
| Turbine Dimensions (Length × Width × Height) | mm | 1900×1450×1540 |
| Turbine Center Height (from Operating Platform) | mm | 960 |
| Steam Seal Type | Comb-Tooth Labyrinth Seal | |
| Noise Level | dB | ≤85 |
| Unit Continuous Operation Time | hr/year | 8000 |
Auxiliary System
| Item | Unit | Data | |
| Oil Station | Flow rate | L/min | 63~125 |
| Oil Pump Configuration | Oil pressure: Adjustable from 0.3 to 1.0 MPa Two AC oil pumps, one DC oil pump | ||
| Seal steam heater | Heat Transfer Area | m2 | 15 |
| Cooling Water Flow Rate | t/h | 35 | |
| Cooling Water Pressure | MPa | 0.2~0.4 | |
| Cooling Water Temperature (Normal/Maximum) | ºC | 27/33 | |
Emergency Shut-off Device
The emergency shut-off device is a protective mechanism that prevents the rotor from exceeding the allowable rotational speed, installed on the main oil pump casing connected to the main shaft. The emergency shut-off device used in this unit is a centrifugal flyweight type, which has an eccentric weight mounted radially on the main oil pump casing. At normal rotational speeds, a spring force balances it. When the unit's speed exceeds the rated speed by 9-11%, the flyweight is thrown out, causing the emergency shut-off throttle to disengage and activate.
Provide guidance for equipment installation and commissioning; conduct technical training; during the warranty period, if the unit fails to operate normally or components are damaged due to quality defects, the Seller shall repair them free of charge.
Warranty Period: One year.
- Similar Products
$1000000.00
1 Piece (MOQ)
Combined Cycle Power Plant Steam Turbine Power Plant
Runh Power Corp., Ltd.
$580000.00
1 Piece (MOQ)
High Efficiency CE Approved Condensing Steam Turbine for Power Plants
Anhui Xinning Equipment Co., Ltd.
$10000000.00
1 Piece (MOQ)
Combined Heat and Power Generation
Anhui Zhengyufeng Energy Saving Technology Co., Ltd.
$19899.00
1 sets (MOQ)
Single Stage Back Pressure Steam Turbine 300kw up to 3000kw
Zbgreat Imp&exp Co., Ltd.