Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

Barrier Gate Radar Detector Sensor for Parking Boom Barrier Gate Control

Price $56.00
Min Order 2 Pieces
Availability In Stock
Shipping From Guangdong, China
Popularity 270 people viewed
Model NO.:
IDL-VBR10B
Signal Transmission:
Ultrasonic
System:
Microwave System
Type:
Vehicles/Pedestrians Detection
Application:
Home, Communication Electronic Products, Industry, Special Equipment, Traffic, Car/Motorcycle
Usage:
Anti-Hitting, Trigger
Certification:
CE, Rosh, Ukca
Input Voltage:
DC12V 150mA
Working Frequency:
24G
Modulation Mode:
Fmcw
Detection Distance:
1 to 6 Meters
Working Temperature:
-40~+85 Degree
Protection Level:
IP67
Trademark:
IDL
Transport Package:
Standard Neutral Package or Customers Requirement
Specification:
131mm*106mm*28.5mm
Origin:
China
Product Description
Product Description

The vehicle detector adopts 24GHz monolithic transceiver chip from Germany and multi-layer composite PCB antenna. Due to its high integration, high bandwidth and low noise, its working spectrum and measurement accuracy are stable and it can be used for barrier with straight arm to avoid any hitting.
 

Product Parameters

1) Input Voltage: DC12V  200mA
2) Working Frequency: 24GHz
3) Modulation Mode: FMCW
4) Sending Power: 10-12dBm
5) Horizontal Beam: <35°
6) Vertical Beam: <17°
7) Detection Distance: 1 - 6 meters, ±0.1 meters
8) Working Temperature: -40ºC~+85ºC
9) Protection Level: IP67

 

Detailed Photos

Certifications


 

Installation Instructions

 1) The trigger radar and the anti-smash radar should be installed perpendicular to the lane's direction. The anti-smash radar is installed on the cabinet below the barrier pole. The trigger radar is installed on the special bracket for the radar installation. The optimal height from the ground to the radar center is 0.6 meters.

 2) The barrier's cabinet must be fixed firmly to avoid shaking when the barrier is working.

 3) Within the detection area, there should be no obstacles other than the barrier pole, e.g. traffic cones, isolation bars, signs, etc..

 4) Please update the radar background in time after the environment in the detecting area is changed.
 

Our Advantages

 Are you still troubled to install loop detector and loops?

1) Cutting ground-Waste time and not good looking;
2) Complex wiring-Messy and Difficult;

3) Mud road-Cannot fix the loop;

4) Cannot detect big truck, trailer or other vehicles with high-bed.

 

Why choose barrier radar detector?

1) Can replace loop detector completely; no wiring layout, save time and cost.

2) Easy installation; Easy parameters setting; Adjustable distance from 1 to 6m.

3) Work in range of 24-24.5Ghz without effects from any climatic environment.

4) Can effectively distinguish vehicles and humans to avoid any hitting.

5) Can be used for trigger detection, e.g. trigger camera to capture the picture.

6) Can be used to trigger the alarm in the warning zone.

7) Can record the traffic and no data is lost when power is off.
 

Wiring Definition

 

Color

Definition

Red

Power Input +12VDC

Black

Power Input GND

Blue

Relay Output COM 

Green

Relay Output NC 

Purple

Function Switch Input

Brown

Function Switch Input Ground

White

Relay Output COM

Yellow

Relay Output NO

 
More Applications









  • Similar Products
Full Page Contact Supplier