Swipe or use the arrows to view product images.
Brand New Jy40z 2-Roll Round Titanium Bar Straightening Machine
| Price | $45600.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 502 people viewed |
Model NO.:
JY40Z
Type:
Balance Roller Straightening Machine
Usage:
Pipe, Bar
Voltage:
380V
Automatic Grade:
Automatic
Principle:
Small Deformation
Certification:
ISO9001, CE
Warranty:
12 Months
Customized:
Customized
Condition:
New
Trademark:
RW
Transport Package:
Seaworthy Package
Specification:
dimension: 5.5mX2.0mX1.35m
Origin:
Shandong, China
Product Description
General Introduction
2-roll straightening machine is mainly used to straighten bended and distorted metal rods or pipes with guaranteed wall thickness with high efficiency. It can process both nonferrous metal or non-metal rod materials. 2-roll straightening machine and peeling machine can be combined to be a connected unit. If straightness of raw materials is above 1.5mm/m, pre-straightening shall be used before peeling.
There are 3 structures of 2-roll straightening machine : two-beam and four-column, pre-stressed type and frame type. After straightening, straightness of finished products can achieve 0.25~0.4mm/m. Surface roughness is less than 1 μm. The transportation devices have both manual and automatic types.
Strengths & Metrics
Optimized straightening effect, applicable to high strength materials
Pre-set angle of straightening rolls; Hyperbola of top and bottom uneven rolls guarantees linear friction between straightening rolls and rods
Infinite variable speed is adopted to adjust speed steadily.
Cooling lubricating extends working life of straightening rolls
Straightening rolls are installed vertically with greater straightening force and is in favour of maintenance
Parameter table
Compositions
Optional Models
2-roll straightening machine is mainly used to straighten bended and distorted metal rods or pipes with guaranteed wall thickness with high efficiency. It can process both nonferrous metal or non-metal rod materials. 2-roll straightening machine and peeling machine can be combined to be a connected unit. If straightness of raw materials is above 1.5mm/m, pre-straightening shall be used before peeling.
There are 3 structures of 2-roll straightening machine : two-beam and four-column, pre-stressed type and frame type. After straightening, straightness of finished products can achieve 0.25~0.4mm/m. Surface roughness is less than 1 μm. The transportation devices have both manual and automatic types.
Strengths & Metrics
Optimized straightening effect, applicable to high strength materials
Pre-set angle of straightening rolls; Hyperbola of top and bottom uneven rolls guarantees linear friction between straightening rolls and rods
Infinite variable speed is adopted to adjust speed steadily.
Cooling lubricating extends working life of straightening rolls
Straightening rolls are installed vertically with greater straightening force and is in favour of maintenance
Parameter table
| Model | JY40Z | ||
| Workpiece required | Diameter range (mm) (non-) | Tensile strength σb≤450(Mpa) | Φ8~Φ40(L≥2000) |
| Tensile strength σb≤1000 | Φ5~Φ18(L ≥2000) | ||
| Surface hardness | ≤HB380(≤HRC42) | ||
| Straightness | ≤3 | ||
| Diameter tolerance | Bright steel≤IT10 | ||
| Roundness | ≤ 50% of diameter tolerance | ||
| Surface roughness | ≤3.2~6.3mm | ||
| Finished product | Straightness | ≤0.3 | |
| Diameter tolerance | ≤IT8 | ||
| Surface roughness (Ra) | ≤0.8μm | ||
| Quantity of roll | 2 | ||
| Roll diameter (mm) | Φ200 | ||
| Straightening speed (infinite variable speed) | 2~14(m/min) | ||
| Main motor power (kW) | 30X2 | ||
| Lift motor power (kW) | 1.1 | ||
| Dimensions (m) | Host machine 5.5X2.0X1.35 | ||
| Total capacity (kW) | 70 | ||
| Source of compressed air (Prepared by the user) | 0.5~0.8MPa,3m3/min,with second grade oil-water separator | ||
Compositions
Optional Models
| Model | Input Dia | Length | Feeding Speed | Surface Roughness | Straightness | Spindle Motor | Total Capacity |
| JY20Z | ф5-ф20mm | ≥2000mm | 2-30m/min | Ra≤0.8 | ≤0.25mm/m | 2×7.5KW | 18KW |
| JY40Z | ф8-ф40mm | ≥2000mm | 2-30m/min | Ra≤0.8 | ≤0.25mm/m | 2×22KW | 47KW |
| JY60Z | ф10-ф60mm | ≥2000mm | 2-30m/min | Ra≤0.8 | ≤0.25mm/m | 2×37KW/55KW | 90/100KW |
| JY80Z | ф20-ф80mm | ≥2000mm | 2-20m/min | Ra≤0.8 | ≤0.25mm/m | 2×55KW/75KW | 125/170KW |
| JY100Z | ф25-ф100mm | ≥3000mm | 2-15m/min | Ra≤0.8 | ≤0.25mm/m | 2×75KW | 170KW |
| JY130Z | ф35-ф130mm | ≥3000mm | 2-15m/min | Ra≤0.8 | ≤0.25mm/m | 2×90KW | 200KW |
| JY160Z | ф40-ф160mm | ≥3000mm | 1-10m/min | Ra≤0.8 | ≤0.25mm/m | 2×132KW | 280KW |
| JY200Z | ф60-ф200mm | ≥3000mm | 1-10m/min | Ra≤0.8 | ≤0.25mm/m | 2×185KW | 410KW |
- Similar Products
$127000.00
1 Set (MOQ)
Low Price High Speed CNC Metal Flattening Lathe Machine
Yantai Haige Machine Tools Co., Ltd.
$5000.00
1 Set (MOQ)
CNC Stainless Steel Wire Straightening and Cutting Machine
Hebei Dapu Machinery Co., Ltd.
$7750.00
1 Piece (MOQ)
Advanced CNC Wire Straightening Machine
Raoyang County Senhong Silk Screen Products Co., Ltd.