Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Security & Protection > Fire Control > Fire Alarm & Smoke Detector
Swipe or use the arrows to view product images.

Bsi Km Ukca NF Wireless Smoke Detectors En14604 Interlinked Smoke Alarms for Scotland

Price $12.50
Min Order 500 Pieces
Availability In Stock
Shipping From Zhejiang, China
Popularity 356 people viewed
Send Inquiry View Full Page
Model NO.:
TSS380D-HR
Type:
Smoke Detectors
Anti-theft Alarm System Approach:
Active
Anti-Theft Alarm System Type:
Smoke Alarms
Anti-Theft Alarm System Distance:
Common Detectors
Types of Smoke Detectors:
Photoelectric Smoke Style
Infrared Sensor Installation:
Ceiling
Produce Life Time:
>10 Years
Installation Method:
Ceiling Mounting
Certificate:
CE, Bsi, NF, Ukca, Red, RoHS, Reach, ISO9001, BSCI
Trademark:
JBE
Specification:
White
Origin:
Zhejiang, China
Product Description

Built-in 3V lithium battery photoelectric smoke alarm with RF function
Technical Specifications:
Power Source DC 3V batteryLow Voltage Threshold ≤2.6V
Operation Current ≤8uAHush time 8minutes
Alarm Sensitivity 0.10 - 0.16dB/mProduct service life >10 years
Comply with standardEN 14604:2005/AC:2008Humidity Range < 93% relative humidity (RH)
Alarm Current ≤60mATemperature Range 0ºC to 40ºC
Alarm Volume >85dB(A) @ 3 meters.Size120mm in diameter x 36.6mm depth
Sound Pattern (BI 0.5s - pause 0.5s - BI 0.5s - pause 0.5s - BI 0.5s - pause 1.5s, with the RED LED flash, repeat this alarm pattern)


Details of the product function:

Standby modeAfter the product is installed, if the smoke alarm device operate properly, the red LED flashes once every 48 seconds
Alarm modeWhen the smoke alarm device detect particles of combustion and the concentration of smoke reaches the alarm threshold, the red LED will flash once per second with pulsating alarm until the smoke is disappeared
Low battery modeWhen the battery voltage bleow threshold, the red LED will flash once every 48 seconds with a sound of "chrip"
Fault modeIf the alarm detection signal decays below threshold, the alarm chirp occurs without LED flashes every 48 seconds
Silence modePress the test button at least 2 seconds, it will go into silence mode for approx 8 minutes. That will desensitize the alarm sensitivity temporarily. At this time, the red LED will flash once every 8 seconds
Non disturb modeWhen the alarm device is in low battery mode, in order to avoid disturbing your at night, Please press the test button for 3 seconds which will mute this warning tone for about 14 hours. The red LED will flash once every 48 seconds during No disturb mode.
Test modeTest the unit to ensure operate properly by pressing the test button. At this time, the red LED will flash once per second with pulsating alarm until test button is released
NOTEWEEKLY TESTING IS REQUIRED
 

 
 
  • Similar Products
Full Page Contact Supplier
↑