Chinese Class B Single Jet Mini Cold with Impulse/Pulsed Output Smart Water Meter Supplier

10 liters/pulse, reed switch for DN15
10 liters/pulse, reed switch for DN20
10 liters/pulse, reed switch for DN25



The operation description of the two reed switches system 

 Please see the diagram of the two reed switches system below, the two reed switches woud be operated "ON" OR"OFF" respectively by the magnet fitted to the pointer or gear during its running on the register,but never "ON" at the same time ,unless the out- magnet attackes.The two reed switches operate two "ON" and two "OFF" in one round of the pointer or the
gear means one signal output,this principle prevent the loss or overcounting of the signal output due to the switches joggling or the pipe vibrating ,so assures reliability of the signal output.  

Description:

This range of water meter is used to measure the total quantity of cold(hot) potable water which consumed in household or a resident unit, passing through the pipeline. 

Compliance with standard: ISO 4064 Class B

FEATURE: 

Dry-dial, magnetic drive, Resistance to exterior magnet interference
Single-jet
Brass body
Selected high quality materials for steady&reliable characteristic
Vacuum sealed register ensures the dial kept free from fog and keep the reading clear in a long term service
Measuring accuracy conform to ISO 4064 class B Standard
Inner adjusting device for option
Hot water or cold water meter are selectable
Small in size and light in weight

WORKING CONDITION: 

Water temperature: ≤40°C for cold water meter
Water temperature: ≤90°C for hot water meter
Working pressure: ≤1.6MPa

MAIN TECHNICAL DATA: 

 
INDICATING ERROR

At low zone is ± 5% from minimum flow rate (qmin) to transitional flow rate (qt) exclusive boundary
At high zone is ± 2% from transitional flow rate (qt) to overload flow rate(qt)





DIMENSIONS AND WEIGHT

 

If you are interested in our water meter, please feel free to contact us!